background image

2

BATTERY TOOL USE AND CARE 

 

Ŷ

Recharge only with the charger specified by the 
manufacturer.

 A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 
another battery pack.

 

Ŷ

Use power tools only with specifically designated 
battery packs.

 Use of any other battery packs may 

create a risk of injury and fire

 

Ŷ

When battery pack is not in use, keep it away from 
other metal objects, like paper clips, coins, keys, 
nails, screws or other small metal objects, that can 
make a connection from one terminal to another.

 

Shorting the battery terminals together may cause 
burns or a fire.

 

Ŷ

Under abusive conditions, liquid may be ejected 
from the battery; avoid contact. If contact 
accidentally occurs, flush with water. If liquid 
contacts eyes, additionally seek medical help.

 

Liquid ejected from the battery may cause irritation or 
burns.

SERVICE

 

Ŷ

Have your power tool serviced by a qualified repair 
person using only identical replacement parts.

 This 

will ensure that safety of the power tool is maintained.

HEDGE TRIMMER SAFETY WARNINGS

 

Ŷ

Keep all parts of the body away from the cutter 
blade. Do not remove cut material or hold material 
to be cut when blades are moving. Make sure the 
switch is off when clearing jammed materials.

 

A moment of inattention while operating the hedge 
trimmer may result in serious personal injury.

 

Ŷ

Carry the hedge trimmer by the handle with cutter 
blade stopped. When transporting or storing the 
hedge trimmer always fit the cutting device cover.

 

Proper handling of the hedge trimmer will reduce 
possible personal injury from the cutter blades.

 

Ŷ

Hold the power tool by insulated gripping surface 
only, because the cutter blade may contact hidden 
wiring. 

Cutter Blades contacting a “live” wire may make 

exposed metal parts of the power tool “live” and could 
give the operator an electric shock.

ADDITIONAL SAFETY RULES

 

Ŷ

Clear the work area before each use. Remove all 
objects such as cords, lights, wire, or string which can 
be thrown or become entangled in the cutting means.

 

Ŷ

Beware of thrown objects; keep all bystanders, children, 
and pets at least 15m away from work area.  

 

Ŷ

Do not operate in poor lighting. The operator requires a 
clear view of the work area to identify potential hazards.

 

Ŷ

Inspect the machine before each use. Check for loose 
fasteners, fuel leaks, etc. Make sure all guards, and 
handles are properly and securely attached. Replace 
any damaged parts before use. Check for battery pack 
leaks.

 

Ŷ

Do not modify the machine in any way. 

 

Ŷ

Do not allow children or untrained individuals to use this 
unit. 

 

Ŷ

Wear full eye and hearing protection while operating the 
product. If working in an area where there is a risk of 
falling objects, head protection must be worn.

 

Ŷ

Secure long hair so it is above shoulder level to prevent 
entanglement in moving parts. 

 

Ŷ

Do not use this machine when you are tired, ill, or under 
the influence of alcohol, drugs, or medication. 

 

Ŷ

Keep firm footing and balance. Do not overreach. 
Overreaching can result in loss of balance or exposure 
to hot surfaces. 

 

Ŷ

Before starting the machine, make sure the cutting 
blades will not come in contact with anything.

 

Ŷ

While operating the hedge trimmer, always hold it 
firmly with both hands by the two handles and ensure 
that the operating position is safe and secure. The 
manufacturer does not recommend the use of steps or 
ladders. If higher trimming is required use and extended 
reach tool.

 

Ŷ

Blades are sharp. When handling the blade assembly, 
wear non-slip, heavy-duty protective gloves. Do not 
place your hand or fingers between blades or in any 
position where they could get pinched or cut. NEVER 
touch blade or service unit unless the battery pack is 
removed.

 

Ŷ

Switch off and remove the battery pack off before:

 

Ɣ

adjusting the working position of the cutting device 

 

Ɣ

cleaning or clearing a blockage

 

Ɣ

leaving the product unattended

 

Ɣ

checking, maintenance or working on the machine

 

Ŷ

Do not force the hedge trimmer through heavy 
shrubbery. This can cause the blades to bind and slow 
down. If the blades slow down, reduce the pace.

 

Ŷ

Do not attempt to cut stems or twigs that are larger 
than 18 mm thick, or those obviously too large to feed 
into the cutting blade. Use a non-powered hand saw or 
pruning saw to trim large stems.

 

Ŷ

Use of hearing protection reduces the ability to hear 
warnings (shouts or alarms). The operator must pay 
extra attention to what is going on in the working area.

 

 WARNING

If the machine is dropped, suffers heavy impact or begins 
to vibrate abnormally, immediately stop the machine and 
inspect for damage or identify the cause of the vibration. 
Any damage should be properly repaired or replaced by 
an authorized service centre.

TRANSPORTATION AND STORAGE

 

Ŷ

Stop the machine, remove the battery and allow both to 
cool before storing or transporting 

 

Ŷ

Clean all foreign material from the product. Store it in a 
cool dry and well-ventilated place that is inaccessible to 
children. For extra safety, store the battery separately 
from the hedge trimmer. Keep away from corrosive 
agents such as garden chemicals and de-icing salts. 
Do not store outdoors.

 

Ŷ

Cover the blade with the blade protector before storing 

Summary of Contents for OHT1851R

















Reviews: