background image

5

 CAUTION

Indicates a potentially hazardous 

situation, which, if not avoided, may 

result in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) 

Indicates a situation that may result 

in property damage.

SYMBOLS IN THIS MANUAL

Parts or accessories are sold separately

Note

Warning

LED DISPLAY

Setting

Green LED light Red LED light

Kickback: active 

On

Off

Kickback: deactivated

On

On

Issue

Green LED light Red LED light

Kickback event

Flashing

Off

Overload

Off

On

ACTIVE KICKBACK AND OVERLOAD DISPLAY

The Kickback feature is active when the dotted green 

lights are flashing. When the product detects tough soil or 

debris, the feature is activated to protect the user. When 

the product stops, release the trigger, and then remove the 

product from the hole.
The Overload function is activated when the red bar light 

is highlighted. When the product stops, release the trigger, 

and then remove the product from the hole.

SWITCH POSITION 

Display

Description

Location

REV

reverse

left

FWD

forward

right

Kickback off

middle

NOTE:

 We do not recommend switching off kickback 

protection at any time, however, in the event it is 

deactivated, the tool still has overload protection. 

Always ensure that the operator has a firm grip and solid 

stance when using this tool.

Summary of Contents for ODT1800





















Reviews: