Ryobi HP-1050, Owner'S Operation Manual

Page: 6 / 8

5
RABBETTING (Fig. 10)
Attach the rabbetting depth adjustment gauge (21) and side plate
with fixing knob. Width of rebating cut (E) is adjustable by moving
the side plate. The depth of rebating cut (F) can be adjusted by
moving the rabbetting depth adjustment gauge, and also the
number of passes made along the work piece. Before working
the actual piece, determine the desired depth using a piece of
scrap wood. While planing, the side plate should rest on edge
of the work piece.
The maximum rabbet cut depth is 14mm.
ATTACHING THE VACUUM (Fig. 11)
The dust can be collected by using a vacuum cleaner.
Connect the vacuum cleaner hose to the chip deflector outlet.
MAINTENANCE
After use, check the tool to make sure that it is in top condition.
It is recommended that you take this tool to a Ryobi Authorized
Service Center for a through cleaning and lubrication at least
once per year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE MOTOR IS
IN MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE
RECEPTACLE BEFORE CHANGING REMOVABLE OR
EXPENDABLE PARTS (BLADE, BIT, SANDING PAPER ETC.),
LUBRICATING OR WORKING ON THE UNIT
WARNING!
To ensure safety and reliability, all repairs should be
performed by an AUTHORIZED SERVICE CENTER or other
QUALIFIED SERVICE ORGANIZATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
“ WARNING To reduce the risk of injury, user must read
instruction manual ”