TOOLS NEEDED (NOT INCLUDED)
The following tools are needed for assembly
and alignment:
FEATURES
KNOW YOUR BENCH GRINDER LINISHER
See Figure. 0
Before attempting to use your new tool,
familiarise yourself with all operating features
and safety requirements.Carefully read this
operator’s manual before using your grinder.
POWER SWITCH ( 1)
Your Bench Grinder linisher features an easy
access On/Off switch for convenience and
safety.
MOTOR
Powered by a precision-built electric induction
motor, your linisher has sufficient power to
handle tough grinding jobs.
GRINDING WHEEL
Equipped with coarse and fine grinding
wheels to suit most applications.
NOTE:New wheels sometimes require dressing
to true up the face of the wheel.
COOLANT TRAY (2)
When grinding, metal objects become heated
quickly. It is important to keep moving the
object back and forth across the grinding
wheel and to cool the object frequently using
the grinder’s Coolant Tray.
WORK REST(3)
The work rests are independently adjustable
to compensate for wheel wear. Before
grinding, make certain the work rests are
adjusted properly. Generally the object being
ground is done slightly above centre of the
grinding wheel.
Adjust the distance between the wheel and
the work rest to maintain 1.6mm. or less
separation as the diameter of the wheel
decreases with use.
SAFETY EYE SHIELD (4)
The safety shield is adjustable for operator
convenience. Operating the grinder without
these features attached could result in
serious injury. Do not grind with the safety
shield raised ; always wear safety glasses for
personal protection.
WHEEL DRESSING TOOL (5)
A buildup of metals, dirt, rust, etc. will become
embedded in the grinding wheel as it wears.
Using the Wheel Dressing Tool to clean the
wheel of these ground-in particles will help
improve the grinder’s performance.
AUTO-ON WORKLIGHT (6)
Your Bench Grinder linisher comes equipped
with a permanently mounted worklight that
automatically lights the work area for safer,
more accurate grinding and sharpening.
LOOSE PART LIST
1. On/ Off Switch
2. Coolant Tray
3. Work Rest
4. Flat Eyeshield
5. Wheel Dressing Tool
6. 12V Light
7. Belt Tensioning Lock Knob
8. Belt Tracking Knob
9. Work rest
10. Guard Cover
11. Guard Cover knob
12. Sanding Belt
13. Safety Guard
A: 7mm, 10mm, and 12mm COMBINATION
WRENCH
B: PHILLIPS SCREWDRIVER
C: ADJUSTABLE WRENCH
Page 5
