background image

Page 4

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Important Safety Instructions For Charger

Save these instructions. This manual contains im-
portant safety and operating instructions for charger.

Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.

Before using battery charger, read all instructions
and cautionary markings in this manual, on battery
charger, and product using battery charger. 

Follow-

ing this rule will reduce the risk of electric shock, fire, or
serious personal injury.

To reduce risk of injury,

 

charge only nickel-cadmium

type rechargeable batteries. Other types of batteries
may burst causing personal injury and damage.

Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.

Do not expose charger to wet or damp conditions.

Following this rule will reduce the risk of electric shock,
fire, or serious personal injury.

Use of an attachment not recommended or sold by
the battery charger manufacturer may result in a risk
of fire, electric shock, or injury to persons. 

Following

this rule will reduce the risk of electric shock, fire, or
serious personal injury.

To reduce risk of damage to charger body and cord,
pull by charger plug rather than cord when discon-
necting charger. 

 Following this rule will reduce the risk

of electric shock, fire, or serious personal injury.

Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress. 

Following this rule will reduce the risk

of serious personal injury.

An extension cord should not be used unless abso-
lutely necessary. 

 Use of improper extension cord could

result in a risk of fire and electric shock. If extension cord
must be used, make sure:

a.  That pins on plug of extension cord are the
     same number, size and shape as those of
     plug on charger.

b.  That extension cord is properly wired and in
     good electrical condition; and

c.  That wire size is large enough for AC ampere
     rating of charger as specified below:

     Cord Length (Feet)

25'

50'

100'

     Cord Size (AWG)

16

16

16

     Note:

 AWG = American Wire Gage

Do not operate charger with a damaged cord or plug.
If damaged, have replaced immediately by a qualified
serviceman. 

Following this rule will reduce the risk of

electric shock, fire, or serious personal injury.

Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. 

Following this

rule will reduce the risk of electric shock, fire, or serious
personal injury.

Do not disassemble charger; take it to a qualified
serviceman when service or repair is required. Incor-
rect reassembly may result in a risk of electric shock
or fire. 

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

To reduce the risk of electric shock, unplug charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this
risk. 

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

Disconnect charger from power supply when not in
use. 

Following this rule will reduce the risk of electric

shock, fire, or serious personal injury.

Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also. 

Following this rule will reduce the risk

of electric shock, fire, or serious personal injury.

SAVE THESE INSTRUCTIONS

Summary of Contents for FL1800











Reviews: