3
ENGLISH (Original Instructions)
■ Store the product in a well-ventilated place that is
inaccessible to children.
Note:
Keep the product away from corrosive agents
such as garden chemicals and de-icing salts.
Important: Abide by all local regulations for the safe
storage and handling of petrol.
■ Never start or run the engine in a closed or poorly
ventilated area; breathing exhaust fumes can kill.
■ Inspect the unit before each use for loose fasteners,
fuel leaks, etc. Replace any damaged parts before
use.
■ Keep petrol and oil away from the eyes. If petrol
or oil comes in contact with the eyes, wash them
immediately with clean water. If irritation is still
present, see a doctor immediately.
■ Ensure to properly close and tighten the caps on both
fuel tanks and fuel containers.
■ To reduce the fire hazard, keep the engine, silencer,
and petrol storage area free of grass, leaves or
excessive grease.
WARNING
Always shut off engine before fuelling. Never add
fuel to a machine with a running or hot engine.
Clean up any spillages and move at least 9m
from refuelling site before starting engine. Do
not smoke!
WARNING
Petroleum and its vapours are highly flammable
and explosive. Exercise extreme caution when
handling fuel.
FUEL AND REFUELING
HANDLING FUEL SAFELY
■ Always handle fuel with care, it is highly flammable.
■ Always refuel outdoors where there are no sparks and
flames. Do not inhale fuel vapours.
■ Do not let petrol or oil come in contact with your skin.
■ Keep petrol and oil away from the eyes. If petrol
or oil comes in contact with the eyes, wash them
immediately with clean water. If irritation is still
present, see a doctor immediately.
■ Clean up spilled petrol immediately. Always mix,
transport and store fuel in a container approved for
petrol.
FILLING THE TANK
WARNING
Check for fuel leaks. If any are found, correct
them before use to prevent fire or burn injury.
■ Clean surface around fuel cap to prevent
contamination.
■ Loosen fuel cap slowly to release pressure and to
keep fuel from escaping around the cap.
■ Carefully pour fuel mixture into the tank. Avoid
spillage.
■ Prior to replacing the fuel cap, clean and inspect the
gasket.
■ Immediately replace fuel cap and hand tighten. Wipe
up any fuel spillage. Move 9 m away from refuelling
site before starting engine.
WARNING
Always shut off engine before fuelling. Never add
fuel to a machine with a running or hot engine.
Move at least 9 m from refuelling site before
starting engine. Do not smoke!
■ The blade must not rotate when the engine is idling.
Do not use the product until this problem is repaired.
Return to Approved Service Centre for assistance if
necessary.
■ Debris when hit by the blade can become thrown
objects and may travel significant distances. Remove
all debris from the work area before operating. Keep
bystanders (especially children) away from the
working area by 15m.
DESCRIPTION
(Refer to Fig 1, 2, 5, 6, 7 & 8)
1. Attachment Shaft
2. Blade
3. Blade Guard
4. Gear Head
5. Hanger Cap
6. Knob
7. Coupler
8. Guide Recess
9. Positioning Hole
10. Upper Flange Washer
11. Cupped Washer
12. Blade Nut (left-hand thread)
13. Spanner
14. Holding Pin
15. Button
16. Second Hole
17. J-handle
18. J-handle Clamp Assistance
19. Combination Wrench
20. Shoulder Strap
21. Strap Hanger
22. Grass Deflector
23. Line Head
24. Drive Connector (left-hand thread)
25. Mounting Plates
26. Screws
27. Mounting Bracket