4
English
proper outlet installed by a qualified electrician.
WARNING
Improper installation of the grounding plug could result in a
risk of electric shock. The wire with green-colored insulation
(with or without yellow stripes) is the grounding wire.
Check with a qualified electrician or service personnel if
the grounding instructions are not completely understood
or if in doubt as to whether the product is properly
grounded. Repair or replace a damaged or worn cord
immediately. Only connect the product to an outlet having
the same configuration as the plug. Do not use an adapter
with this product.
Residual current device (RCD) protection should be
provided on the circuit(s) or outlet(s) to be used for the
air station. Outlets are available having built-in RCD
protection and may be used for this measure of safety.
If the air station is used with an extension cord, ensure the
connection of the power cord of the tool and the extension
cord are not on the ground. Auxiliary devices should always
be plugged into the wall outlet and not at the connection of
an extension cord and the power cord of the tool.
If a protected outlet is not available, do not use the
air station until an outlet can be changed or auxiliary
protection can be obtained. These auxiliary protection
devices are available at your local retailer.
SPECIFICATIONS
Air tank capacity
10 L
Air delivery
56 L/min @ 6.2 bar
Air pressure
9.3 bar max
Input
240 V, AC only, 50 Hz,
1100 W
Tank pressure gauge
38 mm diameter
Regulatory pressure
gauge
50 mm diameter
Net weight
14.5 kg
KNOW YOUR AIR STATION
See Figure 2.
The safe use of this product requires an understanding
of the information on the product and in this operating
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
Accessory storage
The air station features a storage space for pneumatic
accessories.
Carry handle
The air station has a carry handle for easy transport.
Cord wrap
The cord wrap keeps the cord neatly out of the way for
storage.
Drain valve
The drain valve on the tank is for draining condensation to
help prevent tank corrosion.
Folding handle and hand grips
The air station is equipped with conveniently placed hand
grips for lifting and a folding handle that can be adjusted
for storage and transportation.
Heavy-duty plastic housing
The sturdy plastic housing frames the air station to help
protect the gauges and controls from damage due to
impact.
Integrated coil hose retainer with 7.6 m air hose
This tool is equipped with an integrated coil hose retainer
feature that will hold up to 7.6 m of coiled 6.4 mm air hose.
A 7.6 m coiled hose is included with your air station.
Oil-free pump
The oil-free pump reduces the need for maintenance.
Pressure regulator knob
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose. Pressing down on
the knob will lock it into place. This prevents movement of
the knob caused by vibration during use.
Quick coupler
The air station has a 6.4 mm quick connect coupler
located on the side of the unit.
Regulator pressure gauge
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
Safety valve
The safety valve is designed to automatically release air if
the air tank pressure exceeds the preset maximum.
