background image

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Your new 

mitre saw

 has been engineered and manufactured to Ryobi's high standard for 

dependability,

ease of operation, and operator safety. Properly cared for, it will give you years of

 rugged,

trouble free 

performance.

CAUTION: Carefully read through this entire owner's manual before using your

SLIDE COMPOUND MITRE SAW.

THANK YOU FOR BUYING A RYOBI 305mm SLIDE COMPOUND MITRE SAW

OWNER’S OPERATING MANUAL

2000 WATT 305 MM SLIDE COMPOUND

MITRE SAW WITH LASER

 MODEL EMS2305SCL

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your saw properly and only for what it is intended, you will enjoy years of safe, 
reliable service.Thank You again for buying Ryobi tools.

THANK YOU FOR BUYING A RYOBI 305mm SLIDE COMPOUND MITRE SAW

SPECIFICATIONS:

Power

 

Input

2000W

No

 

Load

 

Speed

4200

 

min

 

-1

Blade

 

Diameter

305mm

Blade

 

Arbor

16mm

Weight

23kg

Cutting Capacity
Mitre

Bevel

Max. Width of Cut

Max. Depth of Cut

90°

90°

315mm

110mm

45°L/

 

45°R

45°

220mm

75mm

45°L/

 

45°R

90°

220mm

110mm

90°

45°

315mm

57mm

N197

EMS2305SCL MANUAL  29/4/05  1:54 PM  Page 1

Summary of Contents for EMS2305SCL


















Reviews: