background image

- 1 -

READ ALL INSTRUCTIONS

GENERAL SAFETY RULES

WARNING:

When using electric gardening appliances, basic
safety precautions should always be followed to
reduce the

 

risk of fire, electric shock and personal

injury, including the following:

GENERAL SAFETY RULES

Clear the work area before each use. Remove all
objects, such as rocks, broken glass, nails, wire or
string that can be thrown or become entangled in the
cutting line.

Wear heavy, long pants, boots and gloves. Do not wear
loose fitting clothing, short pants or go bare foot. Do not
wear jewelry of any kind.

Secure hair above shoulder level to prevent
entanglement in moving parts.

Do not allow children or untrained individuals to use this
product.

Keep all by standers, children and pets at least 

15m

away.

Do not operate this product when you are tired, ill or
under the influence of alcohol, drugs or medication.

Do not operate in poor lighting.

Keep firm footing and balance. Do not over reach. Over-
reaching can result in loss of balance or exposure to hot
surfaces.

Keep all parts of your body away from moving parts.

Inspect the product before use. Replace any damaged
parts before use.

Do not operate the product in damp or wet locations.

Do not use the product in the rain.

Wear safety glasses or goggles

 when operating this

 

product.
Use the right product. Use the product for the intended
purpose only.
Do not handle the product with wet hands.
Do not use the product if the switch does not turn the
product on or off. A product that cannot be controlled
with the switch is dangerous and must be repaired.
Avoid accidental starting; never carry the product with
your finger on the trigger.

Stay alert and pay attention to what you are doing. Use
common sense when using this product.

Do not force the product. It will do a better job with less
likelihood of a risk of injury when you operate it at the rate
for which it was designed.

Use the product for cutting grass and light weeds only.
Do not use for any other purpose.

Before starting the product, position it so that the line
does not come in contact with anything you do not  intend
to cut.

Keep the 

safety guard

 in place at all times while

operating the product. The product may overheat without
the 

safety gua

r

in place.

Stop the product immediately, unplug it and check for
damage if you strike or become entangled with foreign
objects. Do not operate the product before having any
damage repaired.

Keep hands away from the cutting line. Do not attempt
to remove cut material or to hold material to be cut when
the line is moving. Be sure the unplug the product and
the release the trigger when clearing jammed material
from the line. Do not grasp the line when picking up or
holding the product.

Be cautious after turning off the product. The line coasts
after turning off the product.

Disconnect the product from the power supply when it is
not in use, before servicing and when changing
accessories.

SPECIFIC SAFETY RULES

Replace the trimmer head if cracked, chipped

 

 or damaged

in any way.

 

Be sure the trimmer head is properly installed

and securely fastened.

Make sure all guards, straps, deflectors and handles
are properly and securely attached.

Use only the manufacturer’s replacement line in the
trimmer head.

Never operate the product without the 

safety guard

 in

place and in good condition.

Maintain a firm grip on both handles while
trimming

Keep the trimmer head below waist level.

Never cut with the trimmer head over 76 cm or

 more

above the ground.

SPECIFIC TRIMMER SAFETY RULES

Summary of Contents for ELT1100QFA

















Reviews: