Ryobi EJ101, Operator'S Manual

Page: 8 / 20

Page 8
ST
OP
UNPACKING
Your saw has been shipped completely assembled and
ready for use. Inspect it carefully to make sure no breakage
or damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Ryobi dealer to
obtain replacement parts before attempting to operate saw.
A blade pack, spark plug wrench, 4 mm hex key, operator's
manual, and warranty registration are also included.
KNOW YOUR RECIPROCATING SAW
Before attempting to use your saw, familiarize yourself with all
operating features and safety requirements.
See Figure 1.
FEATURES
WARNING:
If any parts are missing, do not operate your saw until the missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not allow familiarity with your saw to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
Fig. 1
LOCK-OFF
LEVER
SWITCH
TRIGGER
BLADE
LOCK-ON
BUTTON
SPARK PLUG
WRENCH
STARTER
ROPE
CHOKE LEVER
GASOLINE CAP
ON/OFF
SWITCH
BASE (SHOE)
ASSEMBLY
4 MM
HEX KEY