1
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
SPECIAL RULES
Q
Wear ear protectors with impact drills.
Exposure to
noise can cause hearing loss.
Q
Use auxiliary handles supplied with the tool.
Loss
of control can cause personal injury.
Q
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
SPECIFICATIONS
EID11002RV
Voltage 230
V
50 Hz
Chuck capacity
13 mm (1/2”)
Drilling capacity
in wood
50 mm
in steel
13 mm
in masonry
20 mm
Input 1100
W
No load speed
0-1,200 / 0-3,200 min
-1
Blows per minute
0-19,000 / 0-51,000 min
-1
Weight 3.38
kg
DESCRIPTION
1. Trigger Switch
2. Forward / Reverse Selector
3. Keyless Chuck
4. Variable Speed Selector
5. Lock-on Button
6. Drill Mode Shift Knob
7. Depth Gauge
8. Auxiliary Handle
9. Bit (Not included)
10. Air Vents
11. Livetool Indicator™
12. To Tighten Chuck
13. To Loosen Chuck
14. To Tighten Handle
15. To Loosen Handle
16. Bit Storge
17. Spindle Lock
18. Bubble Level
19. Gear Setting Switch
STANDARD ACCESSORIES
Auxiliary handle and Depth Gauge.
OPERATION
APPLICATIONS
(Use only for the purposes listed below.)
Q
Drilling wood, materials and resin boards.
Q
Drilling concrete (impact drilling only).
Q
Drilling metal: steel, brass, aluminum sheets, stainless
steel & pipe.
SWITCH
See Figure 1 & 3.
Q
This tool can be started and stopped by squeezing
and releasing the trigger switch (1).
Q
The speed can be adjusted in either gear by
controlling the force applied to the trigger.
Q
The maximum speed of the drill may be set at different
speeds by adjusting the variable speed selector (4).
Q
For continuous operation, press the lock-on button (5)
while squeezing the trigger. Squeeze the trigger again
to release the lock.
CHANGING THE ROTATION DIRECTION
See Figure 2.
Q
To change the direction of rotation, stop the tool and
push the forward / reverse selector (2).
Q
When the forward selector is pushed in, the bit rotates
clockwise when viewed from the handle end of the tool.
Q
When the reverse selector is pushed in, the bit rotates
counterclockwise.
MOUNTING AND REMOVING THE BIT
See Figure 4.
Q
Insert the drill bit (9) into the chuck as far as the plain
part of its shank will go.
Q
Tighten the chuck securely by rotating the chuck head
in a clockwise direction (12).
Q
The bit can be removed by rotating the chuck in a
counterclockwise direction (13).
CHANGING BETWEEN DRILLING AND IMPACT
DRILLING MODE
See Figure 5.
The drilling mode shift knob (6) for changing between
the drilling mode and impact drilling mode is positioned
on the top of the tool.
DRILLING MODE:
Shift the knob to the "
" and
showing "
" symbol for drilling.
EID11002RV_24lgs manual_v2B.indd Sec1:1
EID11002RV_24lgs manual_v2B.indd Sec1:1
1/16/10 9:41:18 AM
1/16/10 9:41:18 AM
