2
English
dangerous in the hands of untrained users.
e.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use
of the power tool for operations different from
intended could result in a hazardous situation.
5. SERVICE
a.
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
SPECIAL SAFETY RULES
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the appliance.
This appliance is not intended for use by young
children or infirm persons. Adequate supervision by a
responsible person must be provided to ensure that
they do not play with the appliance.
Keep children and visitors away.
Visitors should
wear safety glasses and be kept a safe distance from
work area. Do not let visitors contact tool or extension
cord.
It is recommended that this tool always be supplied via
a residual current device with a rated residual current
of 30mA or less.
IMPORTANT
Read these safety instructions.
Before using the
heat gun, please read the manual carefully, especially
the safety instructions. Keep this manual for future
reference.
This heat gun may start a fire if appropriate precautions
are not taken.
The heat from the heat gun may reach combustible
materials which you may not be able to see.
Do not leave the heat gun unattended while it is
operating.
Keep the heat gun away from rain or water to avoid
risks of fire or electric shock.
Store under cover in a dry place.
The nozzle gets extremely hot: wear gloves and eye
protection.
For your own safety, please read this manual carefully.
When servicing, always use manufacturer's original
parts to replace worn or damaged parts.
Do not direct the hot airflow towards people or animals.
Never use the heat gun near flammable materials or in
the presence of flammable gases.
Never reduce the hot airflow by blocking or covering
the nozzle.
Be careful not to touch the nozzle as it becomes
extremely hot.
Ensure that the nozzle does not come into contact with
materials during or just after operation.
Always wear eye protection when stripping paint
overhead.
When using the heat gun, do not wear loose clothing
or jewellery, wear non-slip footwear and a hair net to
protect and retain hair.
Make sure you are always well balanced when using
the heat gun.
Ensure that the heat gun is always clean, dry and free
from oil or grease.
Never force the tool or accessories, and only use them
for the purpose for which they are designed.
Always keep the heat gun upright or suspend it with
the stand supplied.
Never use the heat gun in a damp or very wet area (for
example: bathrooms, saunas).
Never leave the heat gun out in the rain and do not use
it on very damp days.
Never push anything down inside the hot air nozzle.
Always allow the heat gun to cool down completely
before storing it.
Always store the heat gun in a safe place, out of the
reach of children. It is not a toy.
This device shall connect to such power supply
network with impedance equal to or less than 0.063 +
j0.039
Ω
or the agreement with power supplier or user.
Any mismatched connection may cause high voltage
