INSTRUCTIONS FOR SAFE HANDLING
POWER TOOL USE AND CARE
n
Do not force the power tool.
Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
n
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that can not be
controlled with the switch is dangerous and must be
repaired.
n
Disconnect the plug from the power source before
making any adjustments, changing accessories
or storing power tools.
Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
n
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the hands
of untrained users.
n
Maintain power tools.
Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
n
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
n
Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed.
Use of the power
tool for operations different from intended could result
in a hazardous situation.
SERVICE
n
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
n
Check damaged parts.
Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, free running of moving
parts, breakage of parts, mounting and any other
part that is damaged should be properly repaired
or replaced by an authorized service centre unless
otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized
service centre. Do not use the tool if the switch does
not turn it on and off.
SPECIFIC SAFETY INSTRUCTIONS FOR
SANDERS
n
Always wear safety goggles and a dust mask
when sanding, especially sanding over-head.
n
The machine is not suitable for wet sanding.
n
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
also cause serious lacerations.
n
The dust bag shall be equipped with the tool.
It shall be emptied frequently. To connect dust bag,
insert the adapter of dust bag to the dust-collection
opening on the rear end of the sander.
WARNING
Do not throw sanding dust on an open fire
because materials in fine particle form may be
explosive.
WARNING
A suitable breathing respirator must be worn
while sanding lead paint, some woods and metal
to avoid breathing the harmful/toxic dust or air.
SPECIFICATIONS
Voltage :
40V ~ 50Hz
Input power :
800W
No load speed :
50-300 m/min
Belt size :
76 x 533 mm
Net weight :
3.6 kg
Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which in the product is to be used.
