FEATURES - EBG2515 / EBG3720
ASSEMBLY
MOUNTING SAFETY EYE SHIELDS
See Figure. 4~5.
Mount the left and right eye shield mounting arm to the inside
of the wheel guards using the clamp brackets, hex bolts
(M6 x 30 mm), and washers (6mm).
Use the illustration as a guide to determine which eye shield
mounting arm is mounted on the left and which eye shield
mounting arm is mounted on the right of the grinder.
Once eye shield mounting arms are firmly in place, slide the
shield bracket onto the eye shield mounting arm. Tighten
the adjustable knob leaving it loose enough to allow the
safety eye shield to be raised and lowered easily.
WARNING:
To prevent personal injury, never operate the bench
grinder unless the safety eye shields and spark deflectors
are properly installed and in place.
0 1
MODEL EBG2515/ EBG3720
SAFETY
EYE SHIELD
ADJUSTABLE
KNOB
SPARK
DEFLECTOR
(LEFT)
AUTO-ON
WORKLIGHT
WORK REST
(LEFT)
WORK REST
(RIGHT)
POWER
SWITCH
ADJUSTMENT
KNOB
WHEEL
GUARD
OFF
ON
COOLANT
TRAY
SPARK
DEFLECTOR
(RIGHT)
SAFETY EYE SHIELD
WITH MAGNIFYING GLASS
Fig.4
Fig.3
HEX BOLT
WASHER
EYE SHIELD
MOUNTING ARM
ADJUSTABLE
KNOB
SAFETY
EYE SHIELD
Page 7
Fig. 5
0 1
HEX BOLT
WASHER
SHIELD ROD
ADJUSTABLE KNOB
SAFETY
EYE SHIELD
