2
ENGLISH
ALWAYS KEEP THE TRIMMER HEAD BELOW
WAIST LEVEL
.
n
Keep the working area free from wires, stones and
debris.
n
Do not cut against hard objects. This could cause
injury or damage the trimmer.
n
Do not use the trimmer to cut grass which is not in
contact with the ground; for example, do not cut grass
which is on walls or rocks.
n
Always use your trimmer in an upright position.
n
Keep hands away from the cutting line. Do not
attempt to remove cut material or to hold material to
be cut when the line is moving.
n
Be sure to unplug the product before clearing jammed
material from the line.
n
Do not grasp the line when picking up or holding the
product.
n
Be cautious after turning off the product. The line
coasts after turning off the product.
n
Do not switch the trimmer on in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gas and
powders.
n
Do not cross roads or gravel paths with the trimmer
still running.
n
Never fit metal cutting elements to the trimmer.
ELECTRICAL SAFETY RULES
n
Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
n
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and
sharp edges.
n
For outdoors work use only suitably approved
extension cables with a min. Conductor cross section
of 1.0 mm2 The plug connectors must have earthing
contacts and be rain-water-proof.
n
Inspect extension cords for deterioration, cuts or
cracks in the insulation. Repair or replace the cords if
any defects appear.
n
A nameplate on the product indicates the unit’s
voltage. Never connect the product to an AC voltage
that differs from this voltage.
n
If the power cord or extension cable becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
n
Electrical power should be supplied via a Residual
Current Device (RCD) with a tripping current of not
more than 30 mA.
MAINTENANCE RULES
n
Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry, clean
and free from oil and grease.
n
Unplug the product before making adjustments or
repairs.
n
Do not use the product if parts have been damaged.
n
Check the product regularly to make sure that it
will operate properly and perform the intended
function. Check for alignment of moving parts, binding
of moving parts, breakage of parts and any other
condition that may affect the unit operation. Inspect
the unit’s power connection. Any part that is damaged
should be properly repaired or replaced by a Ryobi
authorised service centre.
n
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines
and air vents.
n
Never douse or squirt the product with water or any
other liquid. Do not use detergents or solvents. Keep
handles dry, clean and free from debris.
n
After each use, clean with a soft, dry cloth
WARNING:
Before carrying out any maintenance operations,
cut off the electric power supply by disconnecting
the plug from the mains.
n
If the cut-off blade is worn or breaks, have this
replaced by contacting an authorised service centre.
SERVICE RULES
n
Service on this product must be performed
by qualified repair personnel only. Service or
maintenance performed by unqualified personnel
could result in injury to the user and/or damage to the
product. Such service may also void your warranty.
n
Use only identical replacement parts when
servicing the product. Follow the instructions
in the Maintenance section of this manual. Use of
unauthorised parts or failure to follow maintenance
instructions may create a risk of shock, serious injury
to the user and/or damage to the product. Such use
may also void your warranty.
STORAGE AND TRANSPORTATION RULES
n
Stop the motor when you are waiting to cut or when
you are walking from one cutting location to another.
n
Store the product inside in a dry place.
n
Store the product up high or lock it up to prevent
unauthorised use or damage. Keep the product out of
the reach of children.
n
Secure the product when transporting it.
n
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan these
instructions also.
TRAINING
n
Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
n
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations can
restrict the age of the operator.
