6
MAINTENANCE
WARNING
Do not make any adjustments while the motor is in
motion.
Always disconnect the power cord from the socket
before changing removable or expendable parts,
before lubricating or working on the unit.
After use, check the tool to make sure that it is in good
condition.
It is recommended that you take this tool to a Ryobi
authorised service center for thorough cleaning and
lubrication at least once a year.
If the power supply cord is damaged, it must be replaced
only by the manufacturer or by an authorized service
center to avoid risk. Contact authorized service center.
WARNING
To ensure safety and reliability, all repairs should be
performed by an authorised service center or other
quali
fi
ed service organisation.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOLS
Safety Alert
Class II, double insulated
Please read the instructions carefully
before starting the product.
Wear ear protection
Wear eye protection
Wear dust mask.
Do not use chipped, cracked or
defective grinding wheel
Not for wet grinding. Using water or
other liquid coolants may result in
electrocution or shock.
Not for face grinding
For cutting stone
Wear safety hand gloves
Wear non-slip safety footwear when
using this equipment
Wear personal protective equirment
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
