19
MAINTENANCE
CLEANING THE CHIP DUST PORT AND
EMPTYING THE DUST BAG
See Figure 19.
After using the planer for an extended period of time or when
planing wet or green timber, chips may build up in the chip
dust port. Chip build-up restricts air flow and causes the
motor to overheat. Clean the chip dust port and empty the
dust bag regularly.
Remove the battery pack from the tool.
Remove the dust bag from the chip dust port.
Clean the build-up from the chip dust port with a small
piece of wood. Do not use your hands or fingers.
Unzip the dust bag.
Empty all debris from the dust bag and ensure that the
collar is free of debris.
Replace the dust bag.
CHIP DUST PORT
DUST BAG
Fig. 19
