background image

2

RULES FOR SAFE OPERATION 

The appliance is not intended for use by young
children or infirm persons without supervision.

WARNING

Batteries vent hydrogen gas and can explode in
the presence of a source of ignition, such as a
pilot light. To reduce the risk of serious personal
injury, never use any cordless product in the
presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush
with water immediately.

CHARGER SAFETY

To  reduce risk of injury, charge only nickel-cadmium
type rechargeable batteries. Other types of batteries
may burst, causing personal injury and damage.

Do not expose charger to wet or damp conditions.

Use of an attachment not recommended or sold by the
battery charger manufacturer may result in a risk of
fire, electric shock or injuries to person.

To  reduce risk of damage to charger body and cord,
pull by charger plug rather than cord when
disconnecting charger.

Do not operate charger if it has received a sharp

blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman.

Do not disassemble charger; take it to a qualified
serviceman when service or repair is required.
Incorrect reassembly may result in a risk of electric
shock or fire.

To  reduce risk of electric shock, unplug the charger
from outlet before attempting any maintenance or
cleaning. Turning off controls will not reduce this risk.

Disconnect charger from power supply when not in use.

Risk of electric shock. Do not touch uninsulated portion
of output connector or uninsulated battery terminal.

Save these instructions. Refer to them frequently and
use them to instruct others who may use this; unit. 
If you loan someone this unit, loan them these
instructions also.

Make sure cord is located so that it will not be stepped
on, tripped over or otherwise subjected to damage
and stress.

An extension cord should not be used unless
absolutely necessary. Use of improper extension cord
could result in a risk of fire and electric shock. 
If extension cord must be used, make sure:

a. That pins on plug of extension cord are the same

number, size and shape as those of plug on
charger.

b. That extension cord is properly wired and in good

electrical condition.

Do not operate charger with a damaged cord or plug.
If damaged, have it replaced immediately by a
qualified serviceman.

SPECIFICATIONS

CMD1802D

18.0V

13

Variable speed

0-370

0-1350

-
-

35

2.3

130240011

2601038

CMI1442D

14.4V

13

Variable speed

0-380

0-1300

0-4940

0-16900

32

2.3

130240010

2601050

CMI1802D

18.0V

13

Variable speed

0-390

0-1350

0-5070

0-17550

35

2.5

130240011

2601038

Young children should be supervised to ensure
that they do play with the appliance/charger.

Model
Voltage
Chuck (mm)
Switch
No load speed (drill mode):
- Lo speed (min

-1

)

- Hi speed (min

-1

)

No load speed (impact mode):
- Lo speed (min

-1

)

- Hi speed (min

-1

)

Max. Torque (Nm)
Weight - incl. battery pack (KG)

Battery pack:
- 1.5Ah

Charger

Summary of Contents for CMD1802D










Reviews: