![background image](http://html1.mh-extra.com/html/ryobi/cg180spk/cg180spk_owners-operating-manual_1506182003.webp)
■
SUPPLEMENTARY INSTRUCTIONS FOR SAFE
HANDLING
1. Make sure the tool is only connected to the voltage
marked on it’s specifications label.
2. Never use the tool if it’s cover or any bolts are missing. If
the bolts have been removed, replace them prior to use.
Maintain all parts in good working order.
3. Always secure tool when working at elevated positions.
4. Never touch moving parts during use.
5. Never start the tool when it’s rotating component is in
contact with the workpiece.
6. Never lay the tool down before it’s moving parts have
come to a complete stop.
■
APPLICATIONS
(Use only for the following purposes.)
1. Surface finish for wood
2. Remove rust from steel surface as well as finishing.
3. Polishing painted metal, lacquered wood, synthetic resin,
etc.
■
INSTALLATION OF SANDING DISC
To assemble the sanding disc, attach the sanding pad, the
sanding disc and clamp nut to the spindle shaft.
Depress spindle lock and use the wrench spanner provided to
tighten the clamp nut in a clockwise direction.
WARNING: Always remove the electric cord
from the power source before changing
grinding wheel, sanding disc, wool bonnet,
lubricating or when working on the unit to
avoid possible serious injury.
Page 3
Synthetic Wool
Bonnet
Sanding Pad
Start Switch
Lock Button
Variable Speed
Control
Spindle Lock
Grinding Wheel
Wheel Guard
Auxiliary Handle
Wrench Spanner
Clamp Nut
Sanding Disc
Sanding Pad