background image

5

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.

Read The Operator’s Manual

Safety Alert 

No Hands Symbol

No Hands Symbol

No Hands Symbol

No Hands Symbol

SYMBOL 

NAME 

DESIGNATION/EXPLANATION

Voltage

Current

Frequency (cycles per second)

Power

Time

Type of current

Type or a characteristic of current

Rotational speed, at no load

Double-insulated construction

Revolutions, strokes, surface speed, orbits etc., per minute

Do not expose to rain or use in damp locations.

To reduce the risk of injury, user must read and understand 
operator’s manual before using this product.

Eye Protection

Always wear safety goggles, safety glasses with side shields or 
a full face shield when operating this product.

Precautions that involve your safety.

Failure to keep your hands away from the blade will result in 
serious personal injury.

Failure to keep your hands away from the blade will result in 
serious personal injury.

Failure to keep your hands away from the blade will result in 
serious personal injury.

Failure to keep your hands away from the blade will result in 
serious personal injury.

Wet Conditions Alert

.../min

Per Minute

Class II Construction

no

No Load Speed

Direct Current

Alternating Current

min

Minutes

W

Watt

Hz

Hertz

A

Amperes

V

Volts

Hot Surface

To reduce the risk of injury or damage, avoid contact with 
any hot surface.

Summary of Contents for BE321VS



















Reviews: