4 — English
SYMBOLS
SERVicE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUThORiSEd SERVicE cENTRE
for repair. When
servicing, use only identical replacement parts.
WARNiNG:
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator’s manual. If you do not understand
the warnings and instructions in the operator’s manual,
do not use this product. Call Ryobi customer service for
assistance.
WARNiNG:
SAVE ThESE iNSTRUcTiONS
The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields
and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard
safety glasses with side shields. Always use eye protection which is marked to comply with standards.
FEATURES
PROdUcT SPEciFicATiONS
Tine Size ................................................................. 20.3 cm
Tilling Depth ............................................................... 20 cm
Tilling Width .................................................... 17.8-25.4 cm
Weight ....................................................................... 6.1 kg
KNOW YOUR TiLLER ATTAchMENT
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ASSEMBLY
UNPAcKiNG
This product requires assembly.
■
Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.
■
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
■
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
■
If any parts are damaged or missing, Contact Ryobi cus-
tomer service.
WARNiNG:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
WARNiNG:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
iNSTALLiNG ThE TiNES
See Figure 2.
NOTE:
Install the tines before the attachment is connected
to the power head.
The tiller has four tines —two inner tines labeled B and C,
and two outer tines labeled A and D. For correct operation of
the unit, the tines must be installed in the correct orientation.
