background image

Subject to the guarantee condition below, this Ryobi tool
(hereinafter called “the product”) is guaranteed by Ryobi
(hereinafter called “the Company”) to be free from
defects in material or workmanship for a period of 24
months from the date of original purchase covering both
parts and labour. Under the terms of this guarantee, the
repair or replacement of any part shall be the opinion of
the Company or its authorised agent. Should service
become necessary during the warranty period, the owner
should contact the Authorised Ryobi Retailer from whom
the Product  was purchased, or the nearest Company
Branch Office. In order to obtain guarantee service, the
owner must present the sales docket and Guarantee
Certificate to confirm date of purchase. This product is
sold by the dealer or agent as principal and the dealer has
no authority from the Company to give any additional
guarantee on the Company’s behalf except as herein
contained or herein referred to.

Guarantee Conditions

This guarantee only applies provided that the Product has
been used in accordance with the manufacturer’s 
recommendations under normal use and reasonable care 
(in the opinion of the Company) and such guarantee does

not cover damage, malfunction or failure resulting from
misuse, neglect, abuse, or used for a purpose for which
it was not designed or is not suited and no repairs,
alterations or modifications have been attempted by
other than an Authorised Service Agent. This guarantee
will not apply if the tool is damaged by accident or if
repairs arise from normal wear and tear.
The Company accepts no additional liability pursuant to
this guarantee for the costs  of travelling or transportation
of the Product or parts to and from the service dealer or
agent - such costs are not included in this guarantee.
Certain legislation, including the Trade Practices Act,
1974 (as amended) and other state and territorial laws
give rights to the buyer and impose liability on the seller
in certain circumstances. Nothing herein shall have the
effect of excluding, restricting or modifying any condition,
guarantee, right or liability imposed, to the extent only
that such exclusion, restriction or modification would
render any term herein void.

RYOBI TECHNOLOGIES AUSTRALIA PTY. LIMITED

GUARANTEE

This Guarantee Form Should Be Retained By The Customer At All Times

For your record and to assist in establishing date of purchase (necessary for in-guarantee service)

please keep your purchase docket and this form completed with the following particulars.

Purchased From ___________________________________________________________

Address Of Dealer _________________________________________________________

Date _________________Model No ___________Serial No_______________________

Present This Form With Your Purchase Docket When Guarantee Service Is Required

RYOBI TECHNOLOGIES AUSTRALIA PTY. LIMITED

A.B.N. 98 002 277 509

SYDNEY: 

359-361 Horsley Road, Milperra, N.S.W. 2214.

Contact during normal business hours.

Tel: (02) 9792 9888 - Fax: 1800 807 993 - Email: [email protected]

RYOBI NEW ZEALAND PTY. LTD.

AUCKLAND:

503 Mt Wellington Highway, Mt Wellington, N.Z.

Tel: (09) 573 0230 - Free Call: 0800 279 624 - Fax: (09) 573 0231 - Email: [email protected]

Contact during normal business hours.

BRISBANE:

All enquiries Tel : 1300 361 505

TOWNSVILLE:

All enquires Tel : 1300 361 505

MELBOURNE:

960 Stud Road, Rowville.Vic. 3178

Tel : (03) 9764 8655

HOBART:

All enquiries Tel : 1300 360 216

ADELAIDE:

All enquiries Tel : 1300 360 216

PERTH:

33-35 Sorbonne Cres.,Canning Vale. W.A. 6155.

Tel : (08) 9455 7775

Summary of Contents for AP13












Reviews: