![background image](http://html1.mh-extra.com/html/ryobi/ajp-55/ajp-55_owners-operating-manual_1506000004.webp)
Carefully read and understand these instructions
before operating this high pressure washer.
Technical data
Power rating input:
1400 W
Rated pressure:
7 MPa
Allowable pressure:
Max. 10 MPa
Rated flow:
5.5 L / min
Max. water inlet pressure: 0.7 MPa
Rated temperature:
0 - 60℃
Weight :
.7 Kg
Sound pressure level:
Uncertainty:
LpA=77dB(A)
KPA=dB
Sound power level:
LwA=92dB(A)
Vibration Value:
aH=1.8m/s
2
Kah=0.05m/s
2
Name of Parts:
1. Main unit
2. Spray handle
. Variable nozzle lance
4. Spray handle hose (5m)
5. Water connector
6. Hose joint
7. Nozzle cleaning pin
8. Holder for accesseries
9. Cord hook
10. Water supply hose (option)
11. Hose clamp (option)
12. Switch
1. Safety lock button
14. Filter
15. Hook
16. Hook
Preparation
Before starting up your machine, we advise you to carefully
read through this instruction manual. Follow all instructions
to minimize the risk of injuries when using the machine.
Prior to operation
Before starting up your machine, please check it carefully for
any defects. If you find any, do not start up your machine and
contact your distributor.
Especially check:
The insulation of the electric cable should be faultless and
without any cracks. If the electric cable is damaged, it should
be replaced by RYOBI authorized distributor.
Mains power supply connection
The following should be observed when connecting the
machine to the electric installation:
• Check before operation that the local power supply is the
same as the specifications on the rating label.
• This machine is equipped with universal motor with double
insulation. It is not necessary to have earth connection.
• The electric installation shall be made by a certified
electrician.
• It is strongly recommended that the power supply to the
machine should include a residual current device (GFCI).
• Product protection degree:IPX5
General safety regulations and accident
prevention
It is essential that you read the safety regulations and
operating instructions in their entirety and follow the
information contained therein in order to eliminate the
possibility of an accident or potentially dangerous situation
from occurring while working with the machine.
• The power plug must be plugged into a properly installed
socket. The power supply should include a residual
current device for max. 0 mA.
• Always check the device, the mains cable and the plug
before using the machine. Only operate the device when
it is in good working order and has not been damaged in
any way. Damaged parts must be immediately replaced
by a qualified electrician.
• Always pull the power plug out of the socket outlet before
doing any work on the machine, before changing the
nozzle and whenever it is not being used.
•
Warning!
Unsuitable extension cable can be dangerous.
• If an extension cable is used, the plug and socket must be
of watertight construction.
• Only use suitable extension cable when working outdoors.
Extension cable must have a minimum cross-section of
1.5 mm
2
.
•
Warning!
This device was developed to be used with
cleaning agents supplied or recommended by the
manufacturer. The use of any other cleaning agents or
chemicals can negatively affect the safety of the device.
• Cable connections should be kept dry and off the ground.
Always uncoil the extension cable completely to avoid
heat damage to the cable.
•
Warning!
Do not use the device when other persons or
animals are in the near vicinity unless they are wearing
appropriate protective clothing.
•
Warning!
High pressure jets can be dangerous when the
machine is not use properly. Do not direct the jet toward
persons, animals, live electrical equipment or the device
itself.
• Do not direct the jet against yourself or others in order to
clean clothes and footwear.
• Children should be supervised to ensure that they do not
play with the appliance.
• This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their
safety.
•
Warning!
Spray handle hoses, fittings and couplings are
important components for the safety of the device. Only
use spray handle hoses, fittings and couplings that are
recommended by the manufacturer.
• In order to ensure the operational safety of the device,
only use genuine manufacturer’s replacement parts or
parts that have been approved by the manufacturer.
• Do not operate the device if the mains cable or other
important parts of device – e.g. safety related elements,
spray handle hose, spray pistol – are damaged.
• Do not pull or carry the electric tool by its mains cable.
Protect the mains cable from becoming damaged by oil,
solvents and sharp edges.