15
OPERATION
To connect a nozzle to the lance, Fig.16:
A. Nozzle
B. “Click”
C. Quick-connect collar
D. Lance
E. Pull back the quick-connect collar
F. Push the nozzle into place
G. Push the collar forward
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
Engage the lock out on the trigger gun by pushing
up on the lock out until it clicks into the slot.
Pull back the quick-connect collar, Fig.16.
Push the nozzle into place in the lance.
Push the collar forward so that the
nozzle is secured properly. Check to see that the
nozzle is secure.
To disconnect a nozzle from the spray wand
once the cleaning job is complete:
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
Engage the lock out on the trigger gun by pushing
up on the lock out until it clicks into the slot.
Pull back and hold the quick-connect collar.
Remove the nozzle by pulling it from the quick-
connect collar. Place nozzle in the nozzle storage
area on the top of the machine.
USING THE HIGH PRESSURE HOSE
WARNING.
Injection hazard. Fully
unwrap and straighten high pressure
hose prior to and during each use and
do not allow it to become kinked. The
high pressure hose features an outer
covering that provides strength to the
hose. If the outer covering becomes
damaged, stop using the hose and
replace it immediately. A kinked or
damaged hose can develop a high
pressure leak and result in a possible
injection or other serious personal injury.
To prevent damage to the outer covering:
Inspect the hose before every use.
Fully unwrap and straighten hose before use.
Do not allow the high pressure hose to be kinked.
Keep hose away from hot surfaces and sharp
edges.
Do not pull unit by high pressure hose.
Do not allow hose to be crushed or wrapped
around objects.
WASHING WITH DETERGENT
Do not use household detergents, acids, alkalines,
bleaches, solvents, flammable material, or
industrial grade solutions, which can damage the
pump or cause property damage.
We recommend the use of a good quality pressure
washer detergent for use with this pressure
washer. Please follow the instructions on the
container.
Most automobile detergents are a combination of a
detergent and a wax solution, (wash/wax liquid).
These tend to be a thick viscous liquid. The
viscosity (thickness) of the detergent will increase
in cold weather. It is recommended that this type of
detergent is diluted with warm water before filling
the container.
A
B
C
D
F
E
G
Fig. 16
Summary of Contents for AJP-2900
Page 24: ......