background image

4

5

SYMBOLS

SERVICE

This unit has no serviceable parts. If the unit fails due to 
normal wear and tear within two years of purchase, return 
with original receipt for a replacement unit at no charge. Call 
1-800-525-2579 for your nearest 

AUTHORIZED SERVICE 

CENTER.

WARNING: 

To avoid serious personal injury, do not attempt to use this 
product until you read thoroughly and understand com-
pletely the operator’s manual. Save this operator’s manual 
and review frequently for continuing safe operation and 
instructing others who may use this product.

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated with this product. 

SYMBOL 

SIGNAL 

MEANING

DANGER:

 

WARNING:

CAUTION:

CAUTION:

Indicates  an  imminently  hazardous  situation,  which,  if  not  avoided,  will 
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could 
result in death or serious injury.

Indicates a potentially hazardous situation, which, if not avoided, may result 
in minor or moderate injury. 

(Without Safety Alert Symbol) Indicates a situation that may result in prop-
erty damage.

Summary of Contents for AIRgrip ELL0002















Reviews: