2
the work to be performed.
Use of the product for
operations different from those intended could result in
a hazardous situation.
■
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
■
Use battery products only with specifically
designated battery packs.
Use of any other battery
packs may create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
■
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
■
Battery products do not have to be plugged into
an electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery product or when
changing accessories.
Following this rule will reduce
the risk of electric shock, fire, or serious personal injury.
■
Do not place battery products or their batteries near
fire or heat.
This will reduce the risk of explosion and
possibly injury.
■
Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged
battery is subject to explosion.
Properly dispose of a
dropped or damaged battery immediately.
■
Batteries can explode in the presence of a source
of ignition, such as a pilot light.
To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.
■
Do not charge battery product in a damp or wet
location.
Following this rule will reduce the risk of
electric shock.
■
For best results, your battery product should be
charged in a location where the temperature is
more than 10°C but less than 38°C.
To reduce the
risk of serious personal injury, do not store outside or
in vehicles.
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with soap
and water. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention.
Following this rule will
reduce the risk of serious personal injury.
■
Have your battery product serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the battery
product is maintained.
■
When servicing a battery product, use only
identical replacement parts. Follow instructions
in the Maintenance section of this manual.
Use of
unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
■
Save these instructions.
Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also.
ADDITIONAL SAFEY WARNINGS
■
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
■
Always remove battery pack from the tool when you
are assembling parts, making adjustments, cleaning, or
when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal
injury.
■
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
■
Battery tools are always in operating condition. Place
the switch in the off (O) position and remove the battery
pack when the product is not in use or when carrying
at your side.
■
Always place the glue gun so that nozzle does not come
in contact with anything while it is heating or when not in
use. Following this rule will reduce the risk of damage to
items, burns, fire, or serious personal injury.
■
Use caution when applying hot glue to thin or porous
material. The underlying surface could be damaged
or glue could adhere to the surface and be difficult to
remove.
■
Do not force the trigger when applying hot glue. This
could damage the glue gun. Use a test piece of material
to make sure the glue has melted enough to flow
without forcing.
■
Do not use your fingers to press down on an object to
which hot glue has just been applied. This can cause
hot glue to escape from the edges or heat up the
bonding surface and possibly cause burns or damage
to surrounding objects.
■
Allow glue to dry completely before moving your work
to ensure proper adhesion and reduce the risk of burns.
■
If applying glue to very small objects, use tweezers or
Summary of Contents for 6210739
