background image

Page 6

LOOSE PARTS

DESCRIPTION

QUANTITY

DESCRIPTION

QUANTITY

LIST OF LOOSE PARTS

Your #4950301 Router Mounting Kit includes the following parts:

Fig. 1

GUIDE FENCE BRACKET

WITH GUIDE BLOCK

1/2 in. KNOB BOLTS

5/16 in.

WASHERS

THROAT PLATES

ROUTER

MOUNTING PLATE

TABLE

CLAMPING

BRACKET

5/16 in. T-NUTS

 3/4 in. KNOB BOLT

SPACER

POST

GUARD/DUST COVER

WITH PIVOT ASSEMBLY

#5/16-18 SCREWS

#1/4-20 SCREWS

5/16 in. WASHER

#10-32 SCREWS

Guide Fence Bracket with Guide Block .................. 2
Knob Bolt (5/16-18 x 1/2 in. for Guide Fence) ........ 4
5/16 in. Washer ....................................................... 5
5/16 in. T-Nut (Special) ........................................... 6
Spacer ..................................................................... 1
Post ......................................................................... 1
Guard/Dust Cover with Pivot Assembly .................. 1
Throat Plates ........................................................... 5

Router Mounting Plate ............................................ 1
Table Clamping Bracket .......................................... 1
Knob Bolt (#5/16-18 x 3/4 in. for Table Clamp) ...... 1
Screw (M8 x 24 mm flat head) ................................ 4
Screw (#10-32 x 1/2 in. flat head) ........................... 3
Screw (#5/16-18 x 3/4 in. flat head) ........................ 3
Screw (#1/4-20 x 1/2 in. flat head) .......................... 4

M8 SCREWS

Summary of Contents for 4950301

















Reviews: