ASSEMBLY INSTRUCTIONS
7
Fig. 1
Fig. 4
Fig. 2
NOTE:
The blower tube and nozzle or
concentrator tube must be used at all
times when in blower mode to prevent
the motor from overheating.
BLOWER ASSEMBLY
VACUUM ASSEMBLY
BLOWER
TUBE
REAR
HAND
GRIP
BLOWER
CONCENTRATOR
TUBE
BLOWER TUBE
MOTOR HOUSING
Fig. 3
Fig. 5
Fig. 6
WARNING:
To avoid serious
personal injury, be sure the unit is
off and unplugged before
assembling any components.
WARNING:
To avoid serious
personal injury, be sure the unit is
off and unplugged before
assembling any components.
1.
With the unit off and unplugged, release the
vacuum door by carefully inserting a flat
head screwdriver into the latch opening
(Fig. 5). Twist the tip of the screwdriver
gently and pull open the door with your
other hand (Figs. 5 and 6).
WARNING:
To avoid serious
personal injury, the vacuum tube
assembly must be used whenever
the vacuum door is open to avoid
contact with rotating blades.
1.
With the unit off and unplugged, install the
blower tube onto the motor housing.
Turn the tube clockwise until it locks
(Figs. 1, 2 and 3).
ASSEMBLY PARTS
BLOWER MODEL-180r
ASSEMBLY PARTS
BLOWER MODEL-190r
BLOWER
TUBE
REAR
HAND
GRIP
MOTOR
HOUSING
BLOWER
NOZZLE
TUBE
MOTOR
HOUSING
2.
Insert the blower nozzle or concentrator
tube onto the blower tube and turn it
clockwise to lock (Figs. 2, 3 and 4).
