R27, R29, R40
10K
R10, R32, R33, R37, R38
100K
If you have
PCB2 version 1.0
you need to
save one of the resistor pins. Use it to solder
a bridge/jumper across the two pins closest to
the PCB edge on
R37 and R38
. The position
is marked by arrows in the pictures. If you have
PCB2 version 1.1 you can skip this, it's
unnecessary but won't ruin anything if you
happen to do it anyway by misstake. This is the
only difference between the PCB2 versions.
