12
•
Operation Guide
HOW TO
–
Thermocouple Bypass (Emergency use only)
***USE OF THIS BYPASS IS AT YOUR OWN RISK***
On occasion, you may run into a situation where your flame out valve is preventing you from completing your job. This
may be due to a damaged thermocouple, or the flame-out valve itself.
The new flame-out bypass (RC-CAP-0008) is designed to allow you to finish your job, while you wait for replacement
parts. The Bypass is designed for temporary, emergency use only, and should be removed immediately upon work
completion.
The cap is designed to screw onto the top of the flame-out valve.
Simply thread the cap with your fingers over the button on the flame-out valve until snug.
***NEVER LEAVE THE EQUIPMENT UNATTENDED WHILE INSTALLED***
