8
Basic Operations
Turn on/off the power
1. Press [ ] knob to turn on the unit.
The unit will go back to the last source used
prior to the radio being powered off.
2. When on, long press [ ] knob to turn off
the unit.
Mute
Press
[ ] knob to mute the sound.
Note:
• Pressing
[ ]
knob again or adjusting
volume will release muting.
Adjust the volume
Rotate [ ] knob to increase or decrease the
volume level.
The adjustable range of volume is 0 to 50.
Playing source selection
1. Press
[ ] button on the panel to show
main source menu.
2. Touch desired icon to enter corresponding
mode, such as Disc, Navi, Aux, etc.
Drag left/right to scroll.
Note:
• When some sources are not ready, they
can not be selected.
When Vehicle is Put in
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.
When parking brake applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving ahead, if the
video disc is played, the screen appears
WARNING information, and blank screen.
The warning screen will prevent the driver
watching images. The passengers at the
rear seats can watch normally.
Wallpaper
1. Long press the blank area of the main
menu.
2. Select [Wallpaper] on the sub-menu.
3. Select a source from:
[Gallery]: to visit the gallery of mobile
storage.
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Wallpapers]: to show the wallpapers stored
in the unit. Drag left/right to scroll.
4. Select desired picture to view, touch [Set
wallpaper] or [Save] to confirm selection.