Installation:
(1) Find an appropriate location for installation (Illustration 1).
(2) Drill holes according to the size of front enclosure as illustration 2.
(Illustration 1)
(Illustration 2)
location 1
location 2
Φ
20 hole
(Illustration 3)
Cross recessed pan head screws ST4*20
(3) Fix the front body to the location (illustration 3).
(4) Fix the rear enclosure onto the front enclosure; adjust camera angle; lock the front and
rear enclosure using screws (Illustration 4).
(Illustration 4)
Camera
(5) Connect the camera tail and the extension cable inside the vehicle (Illustration 5).
Extension Cable
(Illustration 5)
Camera Tail
Direction Arrow
(Illustration 6)
Rear of the Vehicle
Bumper
(6) Loosen the screw between the camera and vehicle body and adjust the camera to a best
viewing angle (Illustration 6).
camera
camera
Monitor Image
about 137
°
Angle of the Lens
Vehicle Body
