800.851.7347 www.rycominstruments.com
Inductive Connection
This .method .is .convenient .to .use, .and .services .are .not .interrupted . .No .test .cords .or .connec-
tions .are .needed . .The .cable .or .pipe .must .have .good .insulation .or .non-conductive .coating, .
or .the .operating .range .will .be .short .
Turn .the .
T
ransmiTTer
.ON . .Press .the .82 .kHz .button . .
Place
t
ransmItter
on
Its
sIde
as .close .as .pos-
sible .to .the .path .of .the .cable .or .pipe . .Align .the .ARROWS .on .the .SIDE .OF .THE .TRANSMITTER .
in .line .with .the .cable .or .pipe . .First, .locate .the .broad .
T
ransmiTTer
.Null, .then .move .toward .the .
expected .cable .path .while .looking .for .the .signal .carried .by .the .cable .
Start .tracing .the .path .with .the .
r
eceiver
.25 .feet .from .the .
T
ransmiTTer
. .Search .in .the .90º .zone .as .
shown .above . .Locate .the .cable .or .pipe, .and .follow .the .path . .If .the .signal .becomes .weak, .
move .the .
T
ransmiTTer
.to .a .point .25 .feet .behind .the .last .strong .signal, .and .continue .searching .
The .Blind .Search .locating .techniques .is .used .if .the .operator .is .not .aware .if .a .buried .util-
ity .exists . .Two .people .are .needed .for .this .technique . .The .
T
ransmiTTer
.and .the .
r
eceiver
.are .
Held .25 .feet .away .from .each .other . .Each .operator .walks .at .the .same .speed .keeping .a .
distance .of .25 .feet .from .each .other . .When .the .receiver .gives .an .audio .response, .then .a .
buried .utility .is .present .between .the .
r
eceiver
.and .the .
T
ransmiTTer
.
Blind Search
TRANSMITTER
25 Feet (7.5 Meters) Between Transmitter and Reciever
RECEIVER
TRANSMITTER
25 Feet (7.5 Meters) Between Transmitter and Reciever
RECEIVER