RXTEC RX-PSE808G Quick Installation Manual Download Page 2

1. Introduction

The 8-Port Gigabit PoE switch is a Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) 

that  comply  with  the  IEEE  802.3af PoE standard. The 

8 - Port Gigabit 

PoE Switch

enables users to attach 

IEEE802.3af  compliant  devices such as wireless Access   Points  (APS),  VOIP phone, IP camera,   printer and 
Network Attached Storage (NAS) directly to the 

8 -port 10/100/1000M Ethernet PoE

Switch without  requiring  additional 

power on the network. The unit is designed with home  and small business users in mind and is ideal for installations 

where AC power is not available or no cost-effective.

No configuration is required and installation is quick and easy. Support  for  Auto – MDI / MDI-X on all of the ports 
eliminates the need for crossover connection to another switch or HUB.  Auto - Negotiation  on  each  port  senses  the  
link  speed  of a network  device ( either10/100/1000) and intelligently adjusts for compatibility and optimal performance.

* 1-Year Limited Warranty for switch and 1-Year Limited Warranty for the power adaptor are available 
* This device is designed for indoor use. Do not use outdoors.

Power Over Ethernet (PoE):

Power  over  Ethernet  (PoE) integrates  48V  power  and  data  onto  one  single  cable,   eliminating  the need to have 
AC power available at  all  equipment  locations.  Power  and  Data  are  integrated  onto the same  cable,  supporting  
category 5/5e/6  up  to  100 Meters.  PoE  provides  power  to  PoE compatible devices, such as VOIP telephones, 
wireless LAN access points, and IP security cameras.
PoE devices are readily  in  the market, saving  up to 50%  of  overall  installation  cost by eliminating the need to install 
separate electrical wiring and power outlets.         

Features:

8 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 8 ports PoE function ( port 1 ~ port 8)

Compliant with IEEE 802.3af.

Supports PoE power up to 107.8W for all PoE ports.

Supports PoE IEEE802.3af compliant Powered Device (PD)

Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.

Full/half duplex transfer mode for each port.

Wire speed reception and transmission. 

Up to 2K unicast address entities per device. Self-learning, and table aging.

9216-byte jumbo packet length. 

2. 

Power over Ethernet (PoE) & Features

The 8-Port Gigabit PoE switch is an unmanaged 10/100/1000Mbps Gigabit Ethernet PoE switch designed to enhance 
workgroup performance while providing a high level of flexibility. It provides 8 10/100/1000Mbps ports and 8
IEEE802.3af Power over Ethernet (PoE) ports for workstation, It is an ideal solution for small office and home 
users to utilize a combination of Gigabit PoE and non-PoE devices.The switch automatically detects 
IEEE 802.3af compliant devices and provides power and data over a single cable.      

8-Port Ethernet Gigabit PoE Switch               Rev 1.0 12/01/2013 Page 2 / 7

Summary of Contents for RX-PSE808G








Reviews: