1
1. Precautions
●
Storage and Keeping
1.
The storage temperature of this device is -40~+80
℃
, and the operating temperature is
-20~+70
℃
. The humidity is RH90%
2.
Never use this device in environments with excessive moisture, dust or smoke.
3.
Avoid dropping or striking this device.
4.
Avoid using this device in enclosed spaces, areas with excessive vibration or subject to
severe impacts.
5.
Never puncture, scratch or use abrasive cleaning materials on this device.
6.
Do not place cables where they may be pinched or stepped on.
●
Operating Precautions
1. The device is powered by 12 volts from panoramic equipment.
2. Make sure all cables are connected properly. Observe polarity. Improper cable connections
may damage the device.
3. Testing and inspection of the system in accordance with these instructions and a record of
the results should be listed on the daily maintenance report. The units on operating
vehicles must be tested each day prior to the vehicle's operation. Results of this test must
be recorded in the maintenance log.
4. Proper installation requires a good understanding of vehicle/machine electrical systems
and procedures, along with proficiency in the installation.
Warning!
1.
Do not open the equipment
’
s enclosure. This can cause damage, short-circuiting or electrical
shocks that could lead to serious injury or death.
2.
The equipment is not an alternative to safe driving practices.
!
Special Notice
All specifications are subject to change without notice
