Condor Aluminium Radiator Instructions
Specifications
Material: Die cast aluminium
Connections: 1” nipples
Operating Pressure: 6 bar
pH: 6 to 8.5
Max Temperature: 90°C
Standard Colour: RAL 9010 Faral
Guarantee for 10 years once installed in accordance with instructions.
General
The pH values must be between 6.5 and 8.5. Within these values, the aluminium surface will be
sealed and protected from any corrosion. In all cases, it is preferable to use specific corrosion inhibi-
tors, please contact RVR for advice.
The presence of corrosive waters in the system will make the warranty null and void.
The heating circuit must be supplied with a suitable earth connection, in compliance with Standards.
For wall positioning or under windows the following DISTANCES are recommended:
From the floor: 120 mm
From the wall: 30 mm
From the shelf/window sill: 120 mm.
Every set of radiators installed must be equipped with an automatic or manual air vent valve.
The radiators are die
-
cast aluminium, therefore they must be HANDLED WITH CARE during as-
sembly.
Care & Maintenance
The radiators are protected and finished on the surface with a double coat of paint, one integral with
anaphoresis application methods, and one in epoxy polyester powder with electrostatic deposit.
Therefore they cannot be readjusted or other paints applied.
To clean the surface USE NEUTRAL NON
-
ABRASIVE PRODUCTS. It is also recommended NOT
TO COVER THE RADIATOR with damp cloths, wet clothing or porous objects.
ATT: If the radiator must be bled very often, contact your technician or our technical dept. directly.
The radiators produced by INDUSTRIE PASOTTI S.p.A. are guaranteed if used in compliance with
the relevant standards and if installed by qualified staff with respect to the code of practice. The war-
ranty covers the radiator from any manufacturing faults. The warranty comes into force on the date of
the purchase document. Working pressure is certified according to the EN 442/1/2 Standard.
