2
Attention
This symbol indicates that the device has a high voltage. Contact with parts inside
the product is dangerous.
This symbol indicates that the product documentation contains important
instructions for its use or maintenance.
1. Do not install the unit in humid, dusty, or sooty locations. Failure to do so may result in fire or
electric shock.
2. If any unusual smells or smoke come from the unit, stop operation. In this case, immediately
disconnect the power source. Continued use in this condition could cause a fire or electric shock.
3. When a fault is detected in the product, contact your nearest service center. Never disassemble
the product and do not modify its structure. (RVi Company is not responsible for any problems
resulting from changes in product design or as a result of attempted repair products).
4. When cleaning the product, do not expose into the body fluids. This may be a reson of a fire or
electric shock.
Be careful
1. Do not drop any objects on the product and blows to it. Do not install the product in places
with excessive vibration or magnetic interference.
2. Do not install the product in places with high (above 50 ° C) or low (below -40 ° C)
temperatures or high humidity. This can cause a fire or electric shock.
3. If you want to relocate the already installed product to a new location, then before you do so,
turn off the power.
4. During a thunderstorm, it is recommended to disconnect the power supply plug from the AC
line. Otherwise, it may cause fire or damage to the product.
5. Install the product so that the lens is not in direct sunlight and not there heat radiation sources.
7. Do not install the product in front of bright light sources (the sun, welding equipment,
floodlights), as this may cause damage to the light-sensitive sensor imaging.