Ruwac industriesauger NA 7-26, Instruction Manual

Page: 36 / 64

Operation
Page 36
8.1 Applying / releasing the parking brake (optional)
8.2 Switching on the wet separator
1. To stop the wet separator from moving, use the toe of
your shoe to press down the parking brakes (optional)
on the castors.
2. The parking brake is released the by pressing with the toe of
the shoe (see arrow).
1. Connect the handle of the potential equalisation cable
(optional) to the potential equalisation point in the working
environment or the machine that is being cleaned.
See “Establishing potential equalisation (optional)” on
page 32.
2. Attach the earthing clip to the hose connection spigot of the
vacuum hose, see “Establishing potential equalisation
(optional)” on page 32.
3. Press < I > on the membrane keypad.
For further information see <Switching on the wet separator>
in the controls section, see “Switching on the wet separator”
on page 46.
4. Alternative method for switching on: Press the <On / Off>
pushbutton.