background image

Reading steps

 

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows, 

Aslackby, Sleaford, Lincs, NG34 0HZ. 

Company No: 7670072   VAT No: 151744027 

  

4

 

 

Step 9 

 

Step 10 

 

 

 

...and then the bottom step. 

 

Working from the bottom this time, slot a tread panel 
into the top of the step assembly as shown above and 
secure in place using 4 x 65mm screws down through 
each side of the tread panel. 

Step 11 

 

Step 12 

 

 

 

Work your way up the remaining steps, fixing each 
one in place with 8 x 65mm screws as before. 

 

Your reading steps are now complete. 

We hope that you found your product quick and easy to assemble but if not and you require any 
further assistance or have any questions you can contact us by telephone on:

 

01778 440803

 

Email: [email protected] 
www.rutlandcountygardenfurniture.co.uk

 

 

Summary of Contents for Reading steps

Page 1: ...r any reason you need assistance you can find our contact details on the final page of these instructions We highly recommend that any assembly is carried out on a flat level surface if possible and that you use another person to assist you if necessary Package contents Tools required 1 x Back panel 2 x Side panels 3 x Tread panels 6 x Riser panels 54 x 65mm screws Electric screwdriver with No2 Po...

Page 2: ... 1 Step 2 Ensure that you have all of the correct parts as listed on the front page of these instructions including any fixings Using an assistant arrange the back panel and a side panel as shown Step 3 Step 4 Affix the back panel to the side panel using a 65mm screw at the top at the middle down through the tread support into the batten across the back panel ...

Page 3: ... side panel base rail Put the second side panel into place and repeat steps 3 to 5 Step 7 Step 8 Starting from the top step place a riser panel across the assembly making sure that there is no gap between the side panel and the end of the riser panel secure in place with 2 x 65mm screws at each end of the riser panel Add another riser panel above the first one and secure in the same way Proceed as...

Page 4: ...e and secure in place using 4 x 65mm screws down through each side of the tread panel Step 11 Step 12 Work your way up the remaining steps fixing each one in place with 8 x 65mm screws as before Your reading steps are now complete We hope that you found your product quick and easy to assemble but if not and you require any further assistance or have any questions you can contact us by telephone on...

Reviews: