Assembly Instructions
The Double Pergola
1
Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to
familiarise yourself with the assembly process and to also check that you have the correct components. If for any reason you
need assistance, you can find our contact details on the final page of these instructions.
We highly recommend that any assembly is carried out on an open flat, level surface if possible with sufficient space. You will
also require the assistance of at least 2 adults to complete assembly safely.
Please note:
For a free-standing pergola you can remove up to 600mm from the bottom of each post prior to commencing construction.
Tools required:
10mm socket, No2 Pozidriv screwdriver (or electric driver) , step ladder or
platform.
Components
Please Note:
The components listed below are those required to build a Double pergola of 3M in size or larger. For the 2.4M
version the braces are 150mm shorter, there are only 3 rafters and 14 x 120mm coachscrews.
96 x 65mm
woodscrews
16 x 120mm
coachscrews
32 x 70mm
coachscrews
4 x 750mm braces
4 x Posts
4 x Rafters
4 x Pre-drilled end
Rafters
4 x Runners
4 x 650mm braces
