QUICK USE MANUAL 68090258
ORIGINALE
RUTHMANN ITALIA s.r.l. Via Santa Maria del Piano di Sotto, 91/B - 47854 Montescudo – Monte Colombo (RN) – ITALIA
pagina 5
There are three phases to stabilize the machine correctly:
1. Lower the four stabilizers towards the ground
2. Simultaneously lift the two stabilizers that are on the downhill side
3. Simultaneously lift the two stabilizers on the opposite side until the machine is level
N.B: Verify the right levelling of machine looking the optical level placed on the turret.
!
WARNING: It is important lift the crawlers from the field also for few centimetres
For a correct stabilization, you should always lift the tracks from the ground even if for few
centimeters. When the platform is stabilized, the contact of the tracks with the ground results
in a reduction of the stability of the platform.
!
ATTENTION: THIS COULD BE CAUSE OF SERIOUS OR FATAL INCIDENT.
SELF STABILIZING - DESTABILIZING SYSTEM
- Automatic Stabilization:
When the automatic stabilization is activated, the buzzer sends an intermittent sound until the moment in
which the system calculates the good levelling position.
In this situation, the buzzer sends a continuous
sound. Continue the same procedure to reach the wanted levelling and height of carriage from the field.
NOTE: Verify the right levelling of machine looking the optical level placed on the turret.
- Automatic Destabilization:
