7
Technical Data
SV USB 50 PC
SV USB 50 Hub
Mechanical characteristics
Weight:
ca. 120 g
ca. 135 g
Width:
125 mm
Depth:
69 mm
Hight:
29 mm
Transmission characteristics
Transmission length:
max. 50 m
Environmental conditions
Operating temperature:
+5°C to +40°C
Rel. humidity:
max. 85%
Air pressure:
600 to 1000 hPA
Warranty
We guarantee the perfect func-
tion of the SV USB for 2 years
after date of purchase (receipt)
assuming that it was professio-
nally installed and operated.
Safety
These instructions for use con-
tain fundamental instructions
that you must observe when
operating the SV USB. Follow
the instructions precisely to
avoid errors. You must therefore
read these instructions for use
before working with the SV USB.
Never open the housing of the
SV USB. All warranty claims
immediately become invalid
upon opening.
Use is only permitted
in enclosed areas,
i.e. not in the open.
Contact with moistu-
re must be avoided.
Voltage and current
fluctuations when
connecting the SV
USB may damage
electronic compo-
nents. Connect the SV USB to
the computers before connec-
ting the power supply.
Disposal of Waste
Please take part in protecting
our environment by properly
recycling this device at end of
lifetime.
You should never dispose this
device in the regular garbage.
Improper disposal of electronic
waste can release dangerous
substances into the environment
and affect public health.
In case of a malfunction consult
the expert who installed the SV
USB or send it with the receipt
an a short description of
the malfunction to the following
address:
Rutenbeck-Kundenservice
Gewerbegebiet
Im Meilesfeld 5
99819 Marksuhl
Germany
Phone
+49 36925 90090
Fax
+49 36925 90092
Service
Manufacturer‘s Declaration
We, Wilhelm Rutenbeck GmbH
& Co. KG, declare on our sole
responsibility, that the SV USB is
in compliance with the essential
requirements and provisions of
the directives 2004/108/EG and
2006/95/EG.
The complete declaration of con-
formity can be found under
www.rutenbeck.de in the down-
load-sector.