8
www.Rustica.com
STRUT HANGER Installation Instructions
Figure 10
Figure 6
Figure 7
Figure 8
Figure 9
8. Install center spacer brackets using lag screws
(provided) (Figure 6).
9. Install the track at an angle, inserting the end
of the track into the end bracket and laying
the track in the groove of the center spacer
brackets (Figure 7).
10. Slide the remaining end bracket onto the end
of the track. Mark the holes for the end bracket
using a pencil (Figure 8). Set the bracket aside.
11 Drill out the marked holes using a drill with a
1/4” drill bit (Figure 9).
12. Install the end bracket using two lag screws
(provided) (Figure 10).
NOTE:
Ensure the notched side of the track is
facing up with the taller side facing out.
