RUSTA 906512350101, Manual, Page: 8 / 44

8
ENG
OVERHEATING
• The thermostat will turn the machine off it overheats.
• Overheating can be caused by obstruction to the air intakes on the back of the machine or
the grill on the front .If this occurs please disconnect the machine and allow it to cool for
30 minutes. Remove any obstruction and turn the machine back on.
• If the heater ceases to function, the most likely cause is a blown fuse, please contact with
repair center.
CLEANING AND CARE
• There are no parts inside the machine that require your attention or servicing. Do not try
to open the outer case. If you have a problem with the heater, or if the power cord gets
damaged in any way, you MUST take the unit to a suitably qualified engineer or electrical
repair centre.
• Before cleaning the machine, please make sure it is disconnected from the power supply,
and has cooled down completely.
• Please make sure it is disconnected from the power supply, and has cooled down
completely before cleaning.
• Never clean the machine with water and do not let it get wet under any circumstance.
• The outside case can be cleaned using a slightly damp lint-free cloth [a small amount of
detergent can be used if required].
• To remove any dust particles etc. form inside the front grill, or the rear air intakes, you can
use a regular vacuum cleaner.
• Always make sure the machine is completely dry before using.
• If you are not going to use the heater for a while it is best to make sure it is clean and dry
and then store it inside a plastic bag in a cool dry place.
SPECIFICATIONS
Model No 906512350101
Voltage 220-240V 50Hz
Power 2000W