6
CLEANING AND MAINTENANCE
• Always disconnect the appliance from the power outlet and cool it down completely
before cleaning.
• Never immerse the kettle, power cord or power base in water, or allow moisture to get
in contact with these parts.
• Wipe the body of the kettle with a damp cloth.
• CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle to prevent the gloss loss.
• Remember to clean the filter at intervals. For easier cleaning, detach the filter and
then replace it after cleaning.
• When not in use, the power cord can be stored at the bottom of the appliance.
• When not use or storage, the power cord may be wound under the bottom of kettle.
REMOVEL OF MINERAL DEPOSITS
Your kettle should be periodically descaled to get rid of mineral deposits that are in tap
water. The deposits may form scale on the bottom of the kettle and cause the efficiency
of operation to drop. You can use a commercially available descale solution and follow
the instructions on the package, or follow the instructions below:
1. Fill the kettle with approx. 2 dl of white vinegar, then add water to the amount so as to
cover the bottom of kettle completely. Leave the solution in the kettle overnight.
2. Discard the mixture in the kettle, fill the kettle with clean water, boil and then discard
the water. Repeat several times until the odor of vinegar has been flushed away. Any
stains remaining inside the spout can be removed by rubbing with a damp cloth.
ENG