3
CONTENTS
1 x Laser
1 x Transformer with cable
1 x Ground bracket
1 x Flexible peg
1 x Base
INSTRUCTIONS
1. Choose if you want to install your laser using the ground bracket (for soft surfaces) or the
base (for hard, flat surfaces).
1a) GROUND BRACKET
Remove the screw from the laser and fit the ground bracket. Then replace the screw.
1 b) BASE WITH FLEXIBLE POLE
• Remove the screw from the laser (save for future use).
• Screw the flexible peg to the base and then screw the base on to the laser.
Tighten up
Tighten up
Tighten up