RUSTA 77141148, Manual, Page: 3 / 12

3
ASSEMBLY
1. CAUTION! Be sure that the electricity
is turned off before proceeding with
the assembly.
2. Carefully unpack the lamp and put it
on a soft and flat surface.
3. Fix the shade to the lamp holder and
tighten it with the ring.
4. Screw the bulb (E14 Max. 25W, not
included) into the lamp holder in such
way that perfects contact is provided.
5. Connect the plug into main supply.
Switch on/off the lamp with on/off
switch.
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.
Shade
Metal Stand
Bulb (not included)
Ring
Lamp holder
Body
ON/OFF switch
Base
Plug