SE
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and continuously inflate
bouncer during use. Airflow through seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer
after inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Re-measure clearance
zone prior to inflation.
2 m
(6.6 ft)
8
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
3
8
4
5
7
Fäst den korta slangen som
bilden visar.
Do not use extension cords with this product. Outdoor use only.
Read all instructions before assembling this inflatable device. Keep instructions for future use.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
CAUTION:ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 14 years of age. As with all electric products,
precautions should be observed during handling and use to prevent electric shock.
WARNING:
ELECTROCUTION RISK:
-
KEEP ALL ELECTRICAL LINES, RADIOS, SPEAKERS AND OTHER ELECTRICAL DEVICES AWAY
FROM THE CONSTANT AIR INFLATABLE.
-
DO NOT PLACE THE CONSTANT AIR INFLATABLE NEAR OR UNDER OVERHEAD ELECTRICAL LINES.
MODEL NO.
：
S-4E
RATED VOLTAGE RANGE
：
AC220V~240V, 50Hz, 450W
DANGER
CAUTION: ELECTRICALLY
OPERATED PRODUCT
DANGER - TO PREVENT ELECTRIC SHOCK, DO NOT
IMMERSE IN WATER. WIPE CLEAN WITH DAMP CLOTH.
WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH. ADULT
SETUP AND SUPERVISION REQUIRED.
CAUTION: The blower is a high volume blower, and is capable of moving lots of air very quickly. Place the blower in
an area where it will not suck in dirt or leaves. Keep away from water and traffic. Keep children away from the blower.
Only the blower supplied should be used for infl ation
INSTRUCTIONS FOR BLOWER INSTALLATION
NOTE: Set up as close to power source as possible. The product
should be periodically examined for potentially unsafe conditions
such as: damaged cord, plug, housing or parts, and that in the
event such damage is found, the product should not be used until
properly repaired. Never leave the blower outside in the rain or
exposed to the elements when not in use. When in use, do not
place the cord across traffic areas, water or damp areas. The
blower should be placed on a stable surface and anchored per
product instructions.
1) Make sure that the blower switch is in the “OFF” position.
Plug the blower into a 220V outlet.
2) Set the power switch of the blower to “ON” to inflate. After
use, turn the power to “OFF”.
3) To disconnect, have an adult grip it tightly and pull the plug
from wall outlet.
WARNING: Failure to follow these instructions
could result in serious injury or death.
• ADULT SET-UP AND SUPERVISION REQUIRED.
• This blower is for residential use only. It is not
intended to be used in commercial or industrial
settings.
• Never insert fingers, pencils or any other object
through the grill at ANY time.
• Do not operate blower with a damaged cord or
plug, after the appliancemalfunctions or has been
dropped or damaged in any manner.
• Do not operate in the presence of explosive
and/or flammable fumes.
• Never connect the blower to any solid - state
speed control device.
• To reduce the risk of fire or electric shock, do not
use this blower with any solid-state speed control
device.
INSTRUCTIONS FOR BLOWER CLEANING AND STORAGE
Do not immerse the blower in water. Unplug the blower before cleaning. To clean: wipe with a damp cloth. The blower does
not require any lubrication and has no user serviceable parts. Do not attempt to service the blower. When not in use, store the
blower indoors in adry place. Store the blower upright on a stable surface. Loosely coil the cord and place it beside the blower.
This blower is not a toy. Use under the direct supervision of a competent adult.
Keep away from children.
READ AND SAVE THESE INSTRUCTIONS.
Approximate Size Inflated
425*285*208cm
MINIMUM CLEARANCE ZONES
ITEM NO.IB6539
Bouncer with slide
Owner's manual
Ages: 3-8 years
SAFETY WARNINGS: SET UP
ADULT SUPERVISION AND SET UP REQUIRED. This product should be inflated
or deflated only by a competent adult. Follow all instructions provided.
WARNING! Falls onto hard surfaces can result in head or other serious injuries.
Never place on concrete, asphalt, wood,packed earth, grass or other hard surfaces.
Carpet over hardfloors may not prevent injury.
• WARNING! Only for domestic use. Intended for outdoor domestic family use only.
Not for use in public areas or as a rental.
• Product is heavy. Use caution when lifting.
• Product should never be dragged across concrete, pavement or other rough surfaces.
• WARNING! Keep away from fire. Keep fabric clear of all flame and ignition sources.
• Do not set up in windy or rainy conditions: sudden gusts of wind may lift the product
off of the ground.
• Product can be installed in any orientation in relation to the sun, sincethere are no
metal components or surfaces that can absorb excessive solar radiation.
• Set-up in outdoor location only that meets the following criteria:
- Place on level ground and firm grass or soil to allow proper use of stakes.
- Placing on slanted or uneven surfaces may cause the product to tip.
- Stakes should be placed at an angle for better anchorage, should be driven under
the ground to prevent tripping.
- Minimum clearance zones: Place at least other objects. Objects to be avoided
include but are not limited to fences, buildings, trees, overhead branches, laundry
lines,electrical wires, walls, or bodies or sources of water.
- Make sure the area around the product is secure by adding safety barriers, if
necessary, to keep young children and pets from gaining access.
- Electrical cord must not be passed under the air filled devices(inflatable bouncer)
and interfere with its operation.
• The bouncer uses a main powered blower (air pump) to maintainpressure, only to
be used by an adult.
• Only the blower supplied should be used for infl ation.
• Do not use extension cords with this product. Set up as close topower source as
possible.The blower should be securely anchored to the ground before use.
• CAUTION: the blower is capable of moving large volumes of air very quickly. Place
the blower in an area where it will not draw in dirt or leaves. Keep blower and
power cord away from children,water and traffic.
• ATTENTION: Blower should remain on and continuously infl ate bouncer during
use. Airfl ow through seams is normal. Do not try to seal or repair seams.
• (1) Electrocution Risk:
(a) Keep all electrical lines, radios, speakers and other eelctrical devices away
from the Constant Air Inflatable.
(b) Do not place the Constant Air Inflatable near or under overhead electrical
lines.
No sharp objects. No
shoes, no
glasses.
5 Ft.
152 cm
Maximum individual
height: 5
feet
(1
52 cm)
Age
Adult supervision
required. Do not leave
children unattended
.
Total weight limit:
240lbs.(108kg.)
240 lbs.
(108kg.)
No flipping.
Maximum number
of children: 3
No wrestling.
Do
not
slide
head first.
No
hands or
feet on net.
Do not leave
out in rain.
Do not use in
windy conditions.
Must be anchored
using stakes.
Do not
allow
children
t
o
touch fan or electrical cord.
years
• Constant, competent adult supervision of children and other
young users is required at all times.
• Keep the area around the product clean, and clear of objects, to
prevent slips and falls.
• Do not allow children to play in the product until it is fully inflated.
• Do not allow children to play on if wet.Thoroughly dry before use.
•This is not an aquatic toy. It is not to be used in water.
• Instruct children on proper use of this product:
- Children should not wear loose or baggy clothing, scarves, hoods
or clothing with drawstrings or long cords while playing on this
product.
- Children must remove helmets, headgear, shoes and glasses,
as well as any sharp objects from their pockets, as they may
puncture the bouncing surface.
- Toys and other objects should never be allowed inside the
bouncer.
- Instruct children not to attach items to the product that are not
specifi cally designed for use with the equipment, such as but not
limited to, jump ropes, clothesline, pet leashes, cables and chains
as they may cause a strangulation hazard.
- Keep pets away from product.
- Children should bounce away from others, and stay away from
openings and side walls.
- Children should not jump onto or off the product.
- Total weight of children must not exceed 240 lbs. (108 kg) No
more than 3 children should play on the Bouncer at the
same time.
- Do not allow children to play together who are unevenly matched
in weight and height.
• Before and during use, check for air loss. Check blower is properly
connected.
• Always check the product and all its anchorage points before and
during use, and to re-secure as appropriate.
• After infl ation, the blower should run continuously while children
are playing.
• Prior to defl ating, remove all children.
• Always defl ate product after use, and store indoors.
• To be used on soft ground only.
• Users must be discouraged from attempting any unauthorized
modification.
The product should be periodically examined for potentially unsafe
conditions such as: damaged cord, plug, housing, or parts, and that
in the event such damage is found, the product should not be used
until properly repaired. Never leave the fan outside in the rain or
elements when not in use. Refer to the instructions for set-up, storage,
maintenance and care.
SAFETY WARNINGS:
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
SAFETY WARNINGS
：
ELECTRICAL BLOWER
1
2
3
WARNING: USERS MUST BE CAREFUL A BOUNCY ORIENTATION
WITH REGARD TO THE SUN.
The sliding surface should not be located
facing the sun as it can dazzle children when using the bouncy
.
(A) 1 Inflatable Bouncer
(B) 1 Blower
(C) 1
Carrying Bag
(D) 4
Blower Stakes
(E) 8
Bouncer Stakes
(F)
4
Repair Patches
PART LIST
MINIMUM CLEARANCE ZONES
Make sure that there is a 6.6-feet (2m) obstacle-free
zone around the product, including the slide and overhead.
2 m
(6.6 ft)
2 m (6.6 ft)
2.08 m
(6.82 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
2.85m
(9.35ft)
4.25 m
(13.94ft)
weight limit
80lbs.(36kg.)
80 lbs.
(36kg.)
Individual
(G)
1 Inflatable basketball
2.08 m
2.85 m
4.25 m
2 m
2 m
2 m
2 m
2 m
2 m
3
4
1
Fold over only
Turn off the blower and unplug it
from the outlet.
DEFLATION & STORAGE
Untie the drawstring from the Intake
Tube and allow the Bouncer to fully
deflate.
7
6
5
Compress air out
as you are rolling
up inflatable
2
1
4
Blower should remain on and
continuously inflate bouncer
during use. Airflow through
seams is normal.
Do not try to seal or repair seams.
NOTE: Dispose of tissue paper packed inside bouncer after
inflation.
Secure the Bouncer to the ground
with the provided stakes. To prevent
tripping, pull the stake loops all the
way out, then drive stakes completely
into the ground.
Switch power on.
3
INFLATION & STAKING
DISPOSAL
WARNING: Repair patches must be
appliedby and adult only.
KEEP OUT OF REACH OF CHILDREN.
INSTRUCTIONS FOR
BOUNCER MAINTENANCE
INSTRUCTIONS FOR
BLOWER MAINTENANCE
• As an outdoor product, the bouncer is subject to wear
and deterioration. Inspect for signs of fabric failure; weak
or torn surfaces must be repaired promptly.
• To keep the product clean: wipe the bouncer or blower
using a dry cloth or a cloth dampened with a neutral,
non-infl ammable, nontoxic cleaning and sanitizing solution
or pure water.
• Product should never be stored wet. Allow to dry before
rolling up.
• Disassemble and dispose of the equipment in such a
manner that no hazardous conditions exist at the time the
equipment is discarded.
• Blower should be returned to a collection center
• Blower must be unplugged before servicing.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
• Product should be periodically examined for potentially
unsafe conditions such as damaged cord, plug, housing,
or parts, and that in the even such damage is found, the
product should not be useduntil properly repaired. If these
checks are not carried out, the product could overturn or
otherwise become a hazard.
• The blower does not require any lubrication and has no
user serviceable parts. Do not attempt to service the blower.
• Do not immerse the fan in water. To clean, wipe with a
damp cloth.
• Regularly check the intake and output openings and keep
free of dirt, leaves, etc.
• When not in use, store the blower indoors in a dry place.
• Store the blower upright on a stable surface.
• Loosely coil the cord and place it beside the blower.
• When in use, do not place the cord across traffi c areas,
water or damp areas.
• The blower is a high volume blower, and is capable of
moving large volumes of air very quickly. Place the blower
in an area where it will not draw in dirt or leaves.
REPAIR PATCH INSTRUCTIONS
INSTRUCTION:
1. Defl ate the item, clean the area and
allow to dry thoroughly.
2. Cut a portion of the patch to the size
needed and round the corners. (See Fig).
3. Remove the adhesive backing from the
patch material, position the patch over the
damaged area and smooth out any bubbles.
4. Allow to sit for 30 minutes before re-inflating.
Please keep this manual as it contains important information.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
SET-UP
5
7
1. Attach longer fabric
tube to blower unit
making sure the tube
is not twisted.
2. Wrap drawstring
around the tube and
end of blower once,
and tie tightly in place.
CAUTION
CAUTION
CAUTION: Heed all signs and warning labels on the blower motor.
BLOWER CAUTIONS:
electrical hazard
Do not touch
• Do not open or try to service the blower. If blower needs
servicing, take it to a reputable dealer.
• Clearly mark the path of the power cord to avoid tripping
and/or damage by yard equipment such as lawn mowers, etc.
• Do not leave blower unattended.
• Do not allow blower to be used or played with by children.
• Do not cover the air intakes when the blower is being used
and do not insertsmall objects into any part of the blower.
•
WARNING
- Electrical Hazard - DO NOT USE EXTENSION
CORDS WITH THIS PRODUCT.
• Disconnect the blower from the power source when moving
the slide.
•
WARNING -
To reduce the risk of fire or electric shock, do
not use this blowerwith any solid - state speed control device.
• The blower should be securely staked to the ground before use.
3
1
4
2
Remove Bouncer from its packaging
Unroll and unfold
the Bouncer in the
center of the
designated area.
6
4
5
6
Re-measure clearance
zone prior to inflation.
8
Secure the blower to
the ground with the
provided stakes.
OFF
ON
Switch power off
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2 m
(6.6 ft)
2 m (6.6 ft)
2 m (6.6 ft)
2 m
(6.6 ft)
2
Untie the Outlet
tube as shown.
8
9
Tie the short
tube as shown.
MONTERING
1
Ta ur hoppborgen ur
förpackningen.
2
Rulla upp och vik ut hoppborgen
i mitten av det område där den
ska stå.
9
Mät säkerhetsavstånden på nytt
innan uppblåsningen påbörjas.
6
1. Fäst den långa slangen på luftpumpen och
kontrollera att den inte är vriden.
2. Dra dragsnöret runt slange som sitter på
luftpumpen ett varv, dra åt hårt och knyt
fast.
16
