7
Russound TCH1 Installation Manual
Alternate configuration
(If TCHS1 location prevents wired connection to Network Router)
USB/Serial adapter
Controller
Home network router
TCHS1 Interface
Serial cable
USB Port
WiFi
Antenna
Connection
to Controller
CAT-5 Ethernet Cable
Computer
TCH1 Power Supply
TCHS1 Interface
USB/Serial adapter
Computer connection for initial setup
Alternate installation
If it is not feasible to run a CAT-5 cable between the TCHS1 and the
home network router, the wireless capability can be enabled during
setup. There must be a hard wired connection from the TCHS1 to the
computer to perform the setup.
INSTALLATION ANd CONNECTIONS
Basic Installation (cont'd)
Connect the computer to a TCHS1 LAN port (WAN port is not
4.
used) with an Ethernet cable either directly, or through a switch
on the home network. If you will be using the wireless capability
of the TCHS1 to communicate with the network router, then the
connection with the computer won't be needed after the initial
setup.
Connect the power supply and plug in to an AC outlet.
5.
