Russound SaphIR 862 Eye, Installation Manual

Page: 2 / 2

Mounting
surface
front Mounting
surface
rear
Washer
Max thickness
1.75” (4.45 cm)
Min. clearance
2.0” (5.08 cm)
Barrel
Nut
Installation
The SaphIR 862 Eye is installed into a circular hole 0.5” in diameter. Remove the
nut from the receiver’s barrel. Insert the Eye (wire end first) until the bezel is flush
with the surface. Rethread the nut onto the barrel until it is snug against the rear
of the mounting surface. If necessary, use one or both of the included washers for
a more secure installation into soft or thin materials.
Wire Connections
Extended Leads from 862 Eye to Terminal Strip to Connecting Block
The extended connection between the IR receiver and the connecting block
should be made with twisted-pair wiring (i.e., CAT-5e cable). It may be necessary
to use shielded twisted-pair wiring if the wiring is exposed to interference from
power wiring centers or from broadcast signals (FM, TV, etc.) located nearby. The
installer should determine the cable type needed to suit the local conditions of
the installation. A terminal strip is included for extending the leads.
Wire Connections
Direct Connection from 862 Eye to Connecting Block
Connect the 862 Eye to the 857 connecting block. Connect GND (GROUND), IR
(SIGNAL) and Voltage (+12VDC) to connector on the 857.
Terminal
Strip
CAT-5e cable
Orange Pair
Open
Orange
Orange/White
Brown
Brown/White
Brown
Brown/White
Green
Green/White
Green
Green/White
Blue
Blue/White
Blue
Blue/White
Open
Drain Orange Pair
and Blue/White to
GND on 857
SIGNAL
(White)
+12VDC
(Black)
GND
(Black)
857 IR
Connecting Block
Connect to
846C or 1201A
power supply
1
2
3
4
5
6
IR R
ECEIVER
I
N
IR C
OMMON
I
N
IR
C
O
N
FIR
M
+12VDC
GND
STATUS
SIGNAL
EM
IT
TE
RS
S
TATUS
+12VDC
P
OWER
+12VDC
85
7 I
N
FR
A
RE
D
C
O
N
N
EC
TIN
G
B
LO
C
K
862 Eye
862 Eye CAT-5e 857
SIGNAL BL SIGNAL
+12VDC GR/GRW +12VDC
GND BR/BRW GND
OR/ORW GND
BLW GND
SIGNAL (White)
+12VDC (Black)
GND (Black)
1
2
3
4
5
6
IR R
ECEIVER
I
N
IR C
OMMON
I
N
IR
C
O
N
FIR
M
+12VDC
GND
STATUS
SIGNAL
EM
IT
TE
RS
S
TATUS
+12VDC
P
OWER
+12VDC
DESIGNED IN USA MADE IN KOREA
85
7 I
N
FR
A
RE
D
C
O
N
N
EC
TIN
G
B
LO
C
K
857 IR
Connecting Block
Connect to
846C or 1201A
power supply
Specifications
Receive Frequency: 36kHz to 58kHz
Transmit Frequency: 40kHz and 56kHz
Range: On Axis – 55ft to 80ft (16.8-24.4m)
30º Off Axis – 30ft to 55ft (9.1-16.8m)
Power: 12VDC 31mA max.
Dimensions: 0.46” Diameter x 2.03”D
(1.2cm Diameter x 5.16cm D)
Mounting Cord Length: 6.5 ft. (1.95m)